Voice over IP Cisco - when srst enabled mgcp gateway E1 problem

Author

when srst enabled mgcp gateway E1 problem

gokhan senol

2006-11-06, 1:11 pm

Hi,
does anyone know about the problem above?
part of the config is below.it's mgcp gateway.

dial-peer voice 9 pots
destination-pattern 9T
direct-inward-dial
port 0/2/0:15
!
!
call-manager-fallback
max-conferences 8 gain -6
ip source-address 172.16.0.3 port 2000
max-ephones 40
max-dn 50
access-code pri 9 direct-inward-dial

when i use access-code fxo everything is ok, i can call outside.
but when i use access-code pri , it doesnt work.(note:my pri line works when CCM works.)
IOS:c2800nm-ipvoicek9-mz.124-10.bin
thkns a lot