|
Home > Archive > Voice over IP Cisco > November 2006 > Parked line # display on phones
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Parked line # display on phones
|
|
| Duane Priebe 2006-11-21, 1:12 pm |
| Does anyone know of a parameter that can be changed so that when someone
parks a call the park # stays on the phone display longer than 5
seconds?
DAP
Network Admin/IT Manager
The RiverBank
| |
| Jonathan Charles 2006-11-21, 7:11 pm |
| Change the Call Park Display Timer in CallManager Service Parameters, the
default is 10 secs.
"This is a generic timer which provides the flexibility to change the
duration of Call Park Number display and other notification displays on the
IP phone. A value of 0 causes the message to be displayed until it is
overwritten by another message of equal or higher priority. Specify a value
that is less than or equal to the value that is specified for the Call Park
Reversion Timer service parameter; if the value is not less, the call park
display will be overwritten after the call park reversion time expires. This
parameter applies to cisco IP Phone models 7940, 7960, and newer."
Jonathan
On 11/21/06, Duane Priebe <duane@theriverbank.com> wrote:
>
> Does anyone know of a parameter that can be changed so that when someone
> parks a call the park # stays on the phone display longer than 5 seconds?
>
>
> DAP
>
> Network Admin/IT Manager
> The RiverBank
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
| |
| Lelio Fulgenzi 2006-11-21, 7:11 pm |
| in 4.1.3sr3c
Clusterwide Parameters (Feature - General)
Call Park Display Timer : This is a generic timer which provides the flexibility to change the duration of Call Park Number display and other notification displays on the IP phone. A value of 0 causes the message to be displayed until it is overwritten by another message of equal or higher priority. Specify a value that is less than or equal to the value that is specified for the Call Park Reversion Timer service parameter; if the value is not less, the call park display will be overwritten after the call park reversion time expires. This parameter applies to cisco IP Phone models 7940, 7960, and newer.
This is a required field.
Default: 10.
Unit: sec.
Minimum: 0.
Maximum: 100.
Call Park Reversion Timer : This parameter specifies the number of seconds to wait before returning a parked party to the user who parked the call. Make sure that the Call Park Display Timer value is less than or equal to the value that is specified for the Call Park Reversion Timer; if it is not, the call park display will be overwritten after the call park reversion time expires.
This is a required field.
Default: 60.
Unit: sec.
Minimum: 30.
Maximum: 1000.
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"I can eat fifty eggs." "Nobody can eat fifty eggs."
----- Original Message -----
From: Duane Priebe
To: cisco-voip@puck.nether.net
Sent: Tuesday, November 21, 2006 1:15 PM
Subject: [cisco-voip] Parked line # display on phones
Does anyone know of a parameter that can be changed so that when someone parks a call the park # stays on the phone display longer than 5 seconds?
DAP
Network Admin/IT Manager
The RiverBank
------------------------------------------------------------------------------
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|