|
Home > Archive > Voice over IP Cisco > November 2006 > fax problem with ata186 I2
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
fax problem with ata186 I2
|
|
| gokhan senol 2006-11-24, 7:12 am |
| Hi,
design is simple: mgcy gateway which has PRI line, ccm 4.1.3 and ata186
everthing is ok except sending fax. i am tyring to send fax to pstn but most ot thi time i got fail.
which settings should be for ata audio mode: 0015 , 0012, 0035 ?
which settings should be for ata connect mode:
which settings shoul be in mgcp gateway 2851 router : mgcp fax t38 inhibit, no modem passthrough,
tehre are lots of command but actually i did not understand clearly fax issue..
thkns a lot
| |
| Steve G 2006-11-24, 1:11 pm |
| You could paste your MGCP config. also, the output of a 'show controllers
t1'.
On 11/24/06, gokhan senol <gokhanciscottl@yahoo.com> wrote:
>
> Hi,
> design is simple: mgcy gateway which has PRI line, ccm 4.1.3 and ata186
>
> everthing is ok except sending fax. i am tyring to send fax to pstn but
> most ot thi time i got fail.
>
> which settings should be for ata audio mode: 0015 , 0012, 0035 ?
> which settings should be for ata connect mode:
> which settings shoul be in mgcp gateway 2851 router : mgcp fax t38
> inhibit, no modem passthrough,
> tehre are lots of command but actually i did not understand clearly fax
> issue..
>
> thkns a lot
>
>
>
>
>
>
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
| |
| Aman Chugh 2006-11-24, 1:11 pm |
| What sr do you have for 4.1.3 ,i worked on a similar issue where fax machine
would not be able to dial out and give fast busy with MGCP configuration ,In
that case the fxs port was not using the correct css to route the call. we
had this fixed in ES 58 if I remeber correctly.
Thanks
Aman
On 11/24/06, Steve G <smgustafson@gmail.com> wrote:
>
> You could paste your MGCP config. also, the output of a 'show controllers
> t1'.
>
> On 11/24/06, gokhan senol <gokhanciscottl@yahoo.com> wrote:
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
|
|
|
|
|