|
Home > Archive > Voice over IP Cisco > February 2006 > Trusting phone QoS markings on a 4006
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Trusting phone QoS markings on a 4006
|
|
| Jonathan Charles 2006-02-19, 8:17 am |
| I have a customer with a 4006, running CatOS, I tried adding the command:
set port qos 4/1-48 trust-device ciscoipphone
But it doesn't recognize the qos...
What am I missing? The command worked fine (as expected) on the 6500s... and
we are seeing no dscp/tos/cos markings for voice traffic from these devices..
Jonathan
| |
| Jonathan Charles 2006-02-19, 8:17 am |
| Also, MLS is not enabled...
On 2/17/06, Jonathan Charles <jonvoip@gmail.com> wrote:
>
> Running 7.6(5)...
>
> It is running a WS-X4013 1000BaseSX Sup...
>
>
>
> J
>
> On 2/17/06, Matt Slaga (US) < Matt.Slaga@us.didata.com> wrote:
>
>
| |
| Jonathan Charles 2006-02-19, 8:17 am |
| Running 7.6(5)...
It is running a WS-X4013 1000BaseSX Sup...
J
On 2/17/06, Matt Slaga (US) < Matt.Slaga@us.didata.com> wrote:
>
> What version of code and what kind of supervisor module?
>
>
>
> ------------------------------
> *From:* cisco-voip-bounces@puck.nether.net [mailto:
> cisco-voip-bounces@puck.nether.net] *On Behalf Of *Jonathan Charles
> *Sent:* Friday, February 17, 2006 3:23 PM
> *To:* cisco-voip@puck.nether.net
> *Subject:* [cisco-voip] Trusting phone QoS markings on a 4006
>
> I have a customer with a 4006, running CatOS, I tried adding the command:
>
> set port qos 4/1-48 trust-device ciscoipphone
>
> But it doesn't recognize the qos...
>
> What am I missing? The command worked fine (as expected) on the 6500s...
> and we are seeing no dscp/tos/cos markings for voice traffic from these
> devices.
>
>
>
>
> Jonathan
>
> ------------------------------
>
> * Disclaimer:
>
> This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the
> designated addressee(s) named above only. If you are not the
> intended addressee, you are hereby notified that you have received
> this communication in error and that any use or reproduction of
> this email or its contents is strictly prohibited and may be
> unlawful. If you have received this communication in error, please
> notify us immediately by replying to this message and deleting it
> from your computer. Thank you. *
>
| |
| Matt Slaga \(US\) 2006-02-19, 8:17 am |
| globally set:
set qos enable
Besides this, you can only set qos mappings and set cos values to
transmit queues and drop threshholds.
more info:
http://www.cisco.com/en/US/partner/...s663/products_c
onfiguration_guide_chapter09186a00800d81
b1.html
________________________________
From: Jonathan Charles [mailto:jonvoip@gmail.com]
Sent: Friday, February 17, 2006 3:53 PM
To: Matt Slaga (US); cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Trusting phone QoS markings on a 4006
Running 7.6(5)...
It is running aWS-X4013 1000BaseSX Sup...
J
On 2/17/06, Matt Slaga (US) < Matt.Slaga@us.didata.com
<mailto:Matt.Slaga@us.didata.com> > wrote:
What version of code and what kind of supervisor module?
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jonathan
Charles
Sent: Friday, February 17, 2006 3:23 PM
To:cisco-voip@puck.nether.net
Subject: [cisco-voip] Trusting phone QoS markings on a 4006
I have a customer with a 4006, running CatOS, I tried adding the
command:
set portqos 4/1-48 trust-device ciscoipphone
But it doesn't recognizethe qos...
What am I missing? The command worked fine (as expected) on the
6500s... and we are seeing no dscp/tos/cos markings for voice traffic
from these devices.
Jonathan
________________________________
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have
received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error,
please
notify us immediately by replying to this message and deleting
it
from your computer. Thank you.
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. Ifyou have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
|
|
|
|
|