|
Home > Archive > Voice over IP Cisco > February 2006 > Caller's display changed when dial through route
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Caller's display changed when dial through route
|
|
| Henry Lum 2006-02-25, 5:46 pm |
| I notice that when my 7960 IP phone dials through a route point or route
pattern on that modifies the called party number, the display on the
caller's device will change accordingly. Is there a way to suppress this
change and keep the original dialled number on the caller's display?
I am running CCM 4.1(2).
Thanks
Henry
henry lum | product development | newstep networks | 416.979.5404 x230 |
henry.lum@newstep.com <mailto:henry.lum@newstep.com>
| |
| Justin Steinberg 2006-02-25, 5:46 pm |
| Henry,
If you modify the calling party number on the Route List instead of
the Route Pattern the IP phone will not update it's screen.
Justin
On 2/24/06, Henry Lum <Henry.Lum@newstep.com> wrote:
>
>
> I notice that when my 7960 IP phone dials through a route point or route
> pattern on that modifies the called party number, the display on the
> caller's device will change accordingly. Is there a way to suppress this
> change and keep the original dialled number on the caller's display?
>
>
>
> I am running CCM 4.1(2).
>
>
>
> Thanks
>
> Henry
>
>
>
> henry lum | product development | newstep networks | 416.979.5404 x230 |
> henry.lum@newstep.com
>
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
| |
| Henry Lum 2006-02-27, 5:45 pm |
| Hi Justin,
I don't think I understand your solution. I am using a route pattern to
add a prefix to the dialled number and send it to a SIP trunk; there is
no need to change the calling party number. How can I use the Route List
to make the caller's display not showing the prefixes that I added?
Thanks
Henry
-----Original Message-----
From: Justin Steinberg [mailto:jsteinberg@gmail.com]
Sent: Friday, February 24, 2006 3:50 PM
To: Henry Lum
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Caller's display changed when dial through
route point/route pattern
Henry,
If you modify the calling party number on the Route List instead of
the Route Pattern the IP phone will not update it's screen.
Justin
On 2/24/06, Henry Lum <Henry.Lum@newstep.com> wrote:
>
>
> I notice that when my 7960 IP phone dials through a route point or
route
> pattern on that modifies the called party number, the display on the
> caller's device will change accordingly. Is there a way to suppress
this
> change and keep the original dialled number on the caller's display?
>
>
>
> I am running CCM 4.1(2).
>
>
>
> Thanks
>
> Henry
>
>
>
> henry lum | product development | newstep networks | 416.979.5404 x230
|
> henry.lum@newstep.com
>
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
|
|
|
|
|