|
Home > Archive > Voice over IP Cisco > March 2006 > recovery to CCM from SRST
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
recovery to CCM from SRST
|
|
| Hinson, Greg 2006-03-27, 11:57 pm |
|
I am running an H.323 Gateway(2611) with CallManager 4.13(sr2). When
CallManager goes offline, SRST engages immediately, but when it returns,
it takes at least 2 minutes for the phones to un-register from the
Gateway and re-register with CallManager. Is there a way to make the
re-register occur any faster?
In service parameters, I found these timers:
"station keepalive interval"
"station and backup server keepalive interval"
I changed them to an interval of 10 seconds each (since it is a test lab
and only 6 phones) but no improvement. Any ideas?
-Greg
Greg Hinson
Inside Engineering
ADP Dealer Services
2525 SW 1st Ave 3rd Floor
Portland OR 97201
Work: 503.205.4446
Cell: 503.569.4471
This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended rec
ipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
| |
| Kevin Thorngren 2006-03-27, 11:57 pm |
| This is controlled by the "Connection Monitor Duration" parameter. The
default setting is 120 seconds. This can be changed in the Enterprise
Service Parameters or at the Device Pool level.
Kevin
On Mar 27, 2006, at 10:37 AM, Hinson, Greg wrote:
>
> I am running an H.323 Gateway(2611) with CallManager 4.13(sr2). When
> CallManager goes offline, SRST engages immediately, but when it
> returns,
> it takes at least 2 minutes for the phones to un-register from the
> Gateway and re-register with CallManager. Is there a way to make the
> re-register occur any faster?
>
> In service parameters, I found these timers:
> "station keepalive interval"
> "station and backup server keepalive interval"
>
> I changed them to an interval of 10 seconds each (since it is a test
> lab
> and only 6 phones) but no improvement. Any ideas?
>
> -Greg
>
> Greg Hinson
> Inside Engineering
>
>
> ADP Dealer Services
> 2525 SW 1st Ave 3rd Floor
> Portland OR 97201
> Work: 503.205.4446
> Cell: 503.569.4471
>
>
>
> This message and any attachments are intended only for the use of the
> addressee and may contain information that is privileged and
> confidential. If the reader of the message is not the intended
> recipient or an authorized representative of the intended recipient,
> you are hereby notified that any dissemination of this communication
> is strictly prohibited. If you have received this communication in
> error, please notify us immediately by e-mail and delete the message
> and any attachments from your system.
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
|
|
|
|
|