|
Home > Archive > Voice over IP Cisco > March 2006 > CCM version
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| Ortiz, Carlos 2006-03-27, 11:57 pm |
| I just checked the Call Manager compatibility Matrix, but not sure if I
am reading this right. Do the new 7961 and 7941 phones require CCM
4.2.1 to be used?
Carlos
| |
| Ed Leatherman 2006-03-27, 11:57 pm |
| That would be odd, since the 7961's have been out for awhile now, and
4.2was just released this month. Do you mean the gigabit phones?
On 3/27/06, Ortiz, Carlos <CORTIZ@broward.org> wrote:
>
> I just checked the Call Manager compatibility Matrix, but not sure if I
> am reading this right. Do the new 7961 and 7941 phones require CCM 4.2.1to be used?
>
>
>
> Carlos
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
--
Ed Leatherman
IP Telephony Coordinator
West Virginia University
Telecommunications and Network Operations
| |
| Ryan Ratliff 2006-03-27, 11:57 pm |
| The compatibility matrix only lists the default loads for IP phones
per CM version. 4.2(1) and 5.0(1) are the only ones that out of the
box have default loads for the 7941 and 61 phones. They work just
fine on older versions of CM however.
Personally I have a 7941 registered with CM 3.3(5)SR1 server but only
because it auto registered. I suspect a later SR or device pack will
be necessary for me to add one manually.
-Ryan
On Mar 27, 2006, at 11:10 AM, Ortiz, Carlos wrote:
I just checked the Call Manager compatibility Matrix, but not sure if
I am reading this right. Do the new 7961 and 7941 phones require CCM
4.2.1 to be used?
Carlos
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Ortiz, Carlos 2006-03-27, 11:57 pm |
| Well that makes a lot more sense. That was one of the other concerns
(Not seeing it as an option to add manually). If you have a lot of
these out there (79X1) and come across a bug, what's the quickest way to
upgrade them all if you can't change the default load in CCM? I am
about to place an order for more phones and would like to start ordering
the 79X1 series going forward.
Carlos
-----Original Message-----
From: Ryan Ratliff [mailto:rratliff@cisco.com]
Sent: Monday, March 27, 2006 11:42 AM
To: Ortiz, Carlos
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CCM version
The compatibility matrix only lists the default loads for IP phones
per CM version. 4.2(1) and 5.0(1) are the only ones that out of the
box have default loads for the 7941 and 61 phones. They work just
fine on older versions of CM however.
Personally I have a 7941 registered with CM 3.3(5)SR1 server but only
because it auto registered. I suspect a later SR or device pack will
be necessary for me to add one manually.
-Ryan
On Mar 27, 2006, at 11:10 AM, Ortiz, Carlos wrote:
I just checked the Call Manager compatibility Matrix, but not sure if
I am reading this right. Do the new 7961 and 7941 phones require CCM
4.2.1 to be used?
Carlos
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Ryan Ratliff 2006-03-27, 11:57 pm |
| You just need to get to a version of CM that includes them in device
defaults. What version of CM are you running now?
-Ryan
On Mar 27, 2006, at 11:50 AM, Ortiz, Carlos wrote:
Well that makes a lot more sense. That was one of the other concerns
(Not seeing it as an option to add manually). If you have a lot of
these out there (79X1) and come across a bug, what's the quickest way to
upgrade them all if you can't change the default load in CCM? I am
about to place an order for more phones and would like to start ordering
the 79X1 series going forward.
Carlos
-----Original Message-----
From: Ryan Ratliff [mailto:rratliff@cisco.com]
Sent: Monday, March 27, 2006 11:42 AM
To: Ortiz, Carlos
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CCM version
The compatibility matrix only lists the default loads for IP phones
per CM version. 4.2(1) and 5.0(1) are the only ones that out of the
box have default loads for the 7941 and 61 phones. They work just
fine on older versions of CM however.
Personally I have a 7941 registered with CM 3.3(5)SR1 server but only
because it auto registered. I suspect a later SR or device pack will
be necessary for me to add one manually.
-Ryan
On Mar 27, 2006, at 11:10 AM, Ortiz, Carlos wrote:
I just checked the Call Manager compatibility Matrix, but not sure if
I am reading this right. Do the new 7961 and 7941 phones require CCM
4.2.1 to be used?
Carlos
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Ortiz, Carlos 2006-03-27, 11:57 pm |
| 4.02a (sr2b). I guess it's about that time for an upgrade. Let me add
that to the list of IP Telephony projects that keeps mounting.... 
-----Original Message-----
From: Ryan Ratliff [mailto:rratliff@cisco.com]
Sent: Monday, March 27, 2006 11:53 AM
To: Ortiz, Carlos
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CCM version
You just need to get to a version of CM that includes them in device
defaults. What version of CM are you running now?
-Ryan
On Mar 27, 2006, at 11:50 AM, Ortiz, Carlos wrote:
Well that makes a lot more sense. That was one of the other concerns
(Not seeing it as an option to add manually). If you have a lot of
these out there (79X1) and come across a bug, what's the quickest way to
upgrade them all if you can't change the default load in CCM? I am
about to place an order for more phones and would like to start ordering
the 79X1 series going forward.
Carlos
-----Original Message-----
From: Ryan Ratliff [mailto:rratliff@cisco.com]
Sent: Monday, March 27, 2006 11:42 AM
To: Ortiz, Carlos
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CCM version
The compatibility matrix only lists the default loads for IP phones
per CM version. 4.2(1) and 5.0(1) are the only ones that out of the
box have default loads for the 7941 and 61 phones. They work just
fine on older versions of CM however.
Personally I have a 7941 registered with CM 3.3(5)SR1 server but only
because it auto registered. I suspect a later SR or device pack will
be necessary for me to add one manually.
-Ryan
On Mar 27, 2006, at 11:10 AM, Ortiz, Carlos wrote:
I just checked the Call Manager compatibility Matrix, but not sure if
I am reading this right. Do the new 7961 and 7941 phones require CCM
4.2.1 to be used?
Carlos
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Ryan Ratliff 2006-03-27, 11:57 pm |
| The latest dev pack (45.4) on CCO should take care of this for you.
It should make the load for the 41 and 61s TERM41.7-0-3-0S.
-Ryan
On Mar 27, 2006, at 11:54 AM, Ortiz, Carlos wrote:
4.02a (sr2b). I guess it's about that time for an upgrade. Let me add
that to the list of IP Telephony projects that keeps mounting....
-----Original Message-----
From: Ryan Ratliff [mailto:rratliff@cisco.com]
Sent: Monday, March 27, 2006 11:53 AM
To: Ortiz, Carlos
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CCM version
You just need to get to a version of CM that includes them in device
defaults. What version of CM are you running now?
-Ryan
On Mar 27, 2006, at 11:50 AM, Ortiz, Carlos wrote:
Well that makes a lot more sense. That was one of the other concerns
(Not seeing it as an option to add manually). If you have a lot of
these out there (79X1) and come across a bug, what's the quickest way to
upgrade them all if you can't change the default load in CCM? I am
about to place an order for more phones and would like to start ordering
the 79X1 series going forward.
Carlos
-----Original Message-----
From: Ryan Ratliff [mailto:rratliff@cisco.com]
Sent: Monday, March 27, 2006 11:42 AM
To: Ortiz, Carlos
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CCM version
The compatibility matrix only lists the default loads for IP phones
per CM version. 4.2(1) and 5.0(1) are the only ones that out of the
box have default loads for the 7941 and 61 phones. They work just
fine on older versions of CM however.
Personally I have a 7941 registered with CM 3.3(5)SR1 server but only
because it auto registered. I suspect a later SR or device pack will
be necessary for me to add one manually.
-Ryan
On Mar 27, 2006, at 11:10 AM, Ortiz, Carlos wrote:
I just checked the Call Manager compatibility Matrix, but not sure if
I am reading this right. Do the new 7961 and 7941 phones require CCM
4.2.1 to be used?
Carlos
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Ortiz, Carlos 2006-03-27, 11:57 pm |
| Thanks! Hope this helps some others as well....
-----Original Message-----
From: Ryan Ratliff [mailto:rratliff@cisco.com]
Sent: Monday, March 27, 2006 11:56 AM
To: Ortiz, Carlos
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CCM version
The latest dev pack (45.4) on CCO should take care of this for you.
It should make the load for the 41 and 61s TERM41.7-0-3-0S.
-Ryan
On Mar 27, 2006, at 11:54 AM, Ortiz, Carlos wrote:
4.02a (sr2b). I guess it's about that time for an upgrade. Let me add
that to the list of IP Telephony projects that keeps mounting....
-----Original Message-----
From: Ryan Ratliff [mailto:rratliff@cisco.com]
Sent: Monday, March 27, 2006 11:53 AM
To: Ortiz, Carlos
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CCM version
You just need to get to a version of CM that includes them in device
defaults. What version of CM are you running now?
-Ryan
On Mar 27, 2006, at 11:50 AM, Ortiz, Carlos wrote:
Well that makes a lot more sense. That was one of the other concerns
(Not seeing it as an option to add manually). If you have a lot of
these out there (79X1) and come across a bug, what's the quickest way to
upgrade them all if you can't change the default load in CCM? I am
about to place an order for more phones and would like to start ordering
the 79X1 series going forward.
Carlos
-----Original Message-----
From: Ryan Ratliff [mailto:rratliff@cisco.com]
Sent: Monday, March 27, 2006 11:42 AM
To: Ortiz, Carlos
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CCM version
The compatibility matrix only lists the default loads for IP phones
per CM version. 4.2(1) and 5.0(1) are the only ones that out of the
box have default loads for the 7941 and 61 phones. They work just
fine on older versions of CM however.
Personally I have a 7941 registered with CM 3.3(5)SR1 server but only
because it auto registered. I suspect a later SR or device pack will
be necessary for me to add one manually.
-Ryan
On Mar 27, 2006, at 11:10 AM, Ortiz, Carlos wrote:
I just checked the Call Manager compatibility Matrix, but not sure if
I am reading this right. Do the new 7961 and 7941 phones require CCM
4.2.1 to be used?
Carlos
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|