Voice over IP Cisco - CCM 4.1(3)sr2 and MGCP Gateway C2621-XM

This is Interesting: Free IT Magazines  
Home > Archive > Voice over IP Cisco > April 2006 > CCM 4.1(3)sr2 and MGCP Gateway C2621-XM





You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

Author CCM 4.1(3)sr2 and MGCP Gateway C2621-XM
Jose Mujica

2006-04-08, 6:59 pm

Hi.

I have a cisco 2621XM with a NM-HDV2-1T1/E1 configured on the CallManager as a
MGCP gateway. The MGCP gateway T1/PRI endpoint shows up on the correct slot
1/0. That is the onboard T1 port within the NM. Now I would like to add
another VWIC-1MFT-T1 to the VIC available on the NM-HDV2 card but when I add
that on CallManager it also shows up at 1/0.

Any ideas? If I add a VIC2-4FXO on the CCM web page it add the ports as
1/0/0-1/0/3.

Thanks in advanced,
-Jose
Sponsored Links






Free braindumps | Software forum | Database administration forum

Copyright 2003 - 2008 webservertalk.com