|
Home > Archive > Voice over IP Cisco > April 2006 > CME and doorbells??
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
CME and doorbells??
|
|
| Wydra, Jason 2006-04-17, 11:58 pm |
| Has anyone ever successfully hooked up a doorbell via RJ11 to an FXS
port on a 2811 with CME? They want it so that if someone rings the
doorbell it will ring all of the phone and they will have two way
conversations with the person outside.
Thanks,
Jason Wydra
| |
| Justin Steinberg 2006-04-17, 11:58 pm |
| Should be pretty easy. You could buy something like this:
http://www.phonemerchants.com/vikemtel.html
And use PLAR on the FXS port or VG248/VG224 port.
Justin
On 4/12/06, Wydra, Jason <jwydra@burwood.com> wrote:
>
>
>
> Has anyone ever successfully hooked up a doorbell via RJ11 to an FXS port on
> a 2811 with CME? They want it so that if someone rings the doorbell it will
> ring all of the phone and they will have two way conversations with the
> person outside.
>
>
>
> Thanks,
>
>
>
> Jason Wydra
>
>
>
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
| |
| Wydra, Jason 2006-04-17, 11:58 pm |
| I have more to this...... forget about the doorbell for now......I
plugged an analog phone right into the 4FXS/DID port 0 of a 2801
ISR............... I can't for the life of me get dial tone from the
port. Show diag sees the ports. They also show up in the sho run. Don't
ask me if I have a dial peer for the FXS because I do (thanks)!!
I ran a "debug voip ccapi inout" while picking up the analog test set.
I saw nothing as far as debug output. No lights on the fricken hardware
at all. I did my homework as far as whether this 2801 can sustain all
that is installed in this box (there is a sh@tlo@d)
I'm ready to RMA this 4FXS/DID module.
Any ideas before I get a new card????
Thanks,
Jason Wydra
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Wydra, Jason
Sent: Wednesday, April 12, 2006 1:24 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] CME and doorbells??
Has anyone ever successfully hooked up a doorbell via RJ11 to an FXS
port on a 2811 with CME? They want it so that if someone rings the
doorbell it will ring all of the phone and they will have two way
conversations with the person outside.
Thanks,
Jason Wydra
| |
| Wydra, Jason 2006-04-17, 11:58 pm |
| 12.3.11(T4) by the way. I did all the bug scrubs too so don't bother me
with that dudes.
Thanks for your troubles.
Jason Wydra
________________________________
From: Wydra, Jason
Sent: Thursday, April 13, 2006 2:00 AM
To: Wydra, Jason; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] CME and doorbells??
I have more to this...... forget about the doorbell for now......I
plugged an analog phone right into the 4FXS/DID port 0 of a 2801
ISR............... I can't for the life of me get dial tone from the
port. Show diag sees the ports. They also show up in the sho run. Don't
ask me if I have a dial peer for the FXS because I do (thanks)!!
I ran a "debug voip ccapi inout" while picking up the analog test set.
I saw nothing as far as debug output. No lights on the fricken hardware
at all. I did my homework as far as whether this 2801 can sustain all
that is installed in this box (there is a sh@tlo@d)
I'm ready to RMA this 4FXS/DID module.
Any ideas before I get a new card????
Thanks,
Jason Wydra
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Wydra, Jason
Sent: Wednesday, April 12, 2006 1:24 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] CME and doorbells??
Has anyone ever successfully hooked up a doorbell via RJ11 to an FXS
port on a 2811 with CME? They want it so that if someone rings the
doorbell it will ring all of the phone and they will have two way
conversations with the person outside.
Thanks,
Jason Wydra
| |
| Marcin Nowacki 2006-04-17, 11:58 pm |
| Hello
You may try 2N Entrycom . This site is in Czech language, but maybe
you'll find something in English :
http://www.2n.cz/uploads/1/PAGES/999/
You can use this door communicator as an analog phone ( connected to FXS
port ) , and even if you want to open a gate you may call from entrycom
on the cell phone and open the gate from the cell phone :-)
Greetings
Marcin
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Wydra, Jason
Sent: Wednesday, April 12, 2006 8:24 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] CME and doorbells??
Has anyone ever successfully hooked up a doorbell via RJ11 to an FXS
port on a 2811 with CME? They want it so that if someone rings the
doorbell it will ring all of the phone and they will have two way
conversations with the person outside.
Thanks,
Jason Wydra
| |
| Wydra, Jason 2006-04-17, 11:58 pm |
| Thanks for your input. You will probably see the more resent posts I've
left. I'm not dealing with a doorbell hardware issue. My first goal is
to get dial tone to my test analog phone on the same port that the
doorbell would like to connect to. By they way, in normal configuration
for a doorbell I would do a "connection plar". In the "connection plar"
case I would not expect dial tone................... For testing I
removed the PLAR statement and reset the voice port. Dead air I
found!!!!
Thanks,
Jason Wydra
________________________________
From: Marcin Nowacki [mailto:Marcin_Nowacki@sevenet.pl]
Sent: Thursday, April 13, 2006 2:30 AM
To: Wydra, Jason; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] CME and doorbells??
Hello
You may try 2N Entrycom . This site is in Czech language, but maybe
you'll find something in English :
http://www.2n.cz/uploads/1/PAGES/999/
You can use this door communicator as an analog phone ( connected to FXS
port ) , and even if you want to open a gate you may call from entrycom
on the cell phone and open the gate from the cell phone :-)
Greetings
Marcin
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Wydra, Jason
Sent: Wednesday, April 12, 2006 8:24 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] CME and doorbells??
Has anyone ever successfully hooked up a doorbell via RJ11 to an FXS
port on a 2811 with CME? They want it so that if someone rings the
doorbell it will ring all of the phone and they will have two way
conversations with the person outside.
Thanks,
Jason Wydra
| |
| Andrius Kislas 2006-04-17, 11:58 pm |
| We have installed this one:
http://www.rocom-gmbh.de/englisch/p.../doortelloe.htm
I had a problem with disconnect on FXS. Modifications on voice port had
to be done:
voice-port 2/0
no supervisory disconnect lcfo
disconnect-ack
timeouts call-disconnect 0
timeouts wait-release 20
timeouts power-denial 1200
Call from and to CallManager are configured with dial-peers and router
patterns.
Andrius
Wydra, Jason wrote:
> Has anyone ever successfully hooked up a doorbell via RJ11 to an FXS
> port on a 2811 with CME? They want it so that if someone rings the
> doorbell it will ring all of the phone and they will have two way
> conversations with the person outside.
>
>
>
> Thanks,
>
>
>
> **Jason Wydra**
>
>
>
>
>
>
> ------------------------------------------------------------------------
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|