|
Home > Archive > Voice over IP Cisco > May 2006 > VG248 port stuck offhook
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
VG248 port stuck offhook
|
|
| Ed Leatherman 2006-05-18, 1:11 pm |
| Anyone had a single port on VG248 stuck offhook before? I've tried disabling
the port and re-enabling. The Fax machine connected to it is on hook.
Trying to cover all the bases before I ask them to check the wiring.
--
Ed Leatherman
IP Telephony Coordinator
West Virginia University
Telecommunications and Network Operations
| |
| Green, Ronnie 2006-05-18, 1:11 pm |
| I have had the same problem with patient room phones, I have had
discussions with cisco and have not found a reason or solution. What's
strange is I can receive calls but can't make calls or get a dial tone
and the gateway recognizes when I go off hook or on hook. To clear it I
have to telnet to the VG248 and do a restart, this takes care of the
problem until the next time which happens about every 5-6 weeks randomly
with different phones.
Ronnie Green
Director of IT
McBride Clinic, Inc.
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Ed Leatherman
Sent: Thursday, May 18, 2006 9:33 AM
To: cisco Voip
Subject: [cisco-voip] VG248 port stuck offhook
Anyone had a single port on VG248 stuck offhook before? I've tried
disabling the port and re-enabling. The Fax machine connected to it is
on hook.
Trying to cover all the bases before I ask them to check the wiring.
--
Ed Leatherman
IP Telephony Coordinator
West Virginia University
Telecommunications and Network Operations
CONFIDENTIALITY NOTICE: This e-mail message, including any attachments,
is for the sole use of intended recipients, and may contain privileged
and confidential information. If you are not the intended recipient
destroy all copies and reply by e-mail to the sender. Unauthorized review,
use, distribution, or disclosure of this information is prohibited.
| |
| Jason Aarons \(US\) 2006-05-18, 1:11 pm |
| There is a show command for rtp. Where is the fax stream connected to,
PSTN? Perhaps the far side is not disconnecting.
Is your VG MGCP or SCCP, etc?
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Ed Leatherman
Sent: Thursday, May 18, 2006 10:33 AM
To: cisco Voip
Subject: [cisco-voip] VG248 port stuck offhook
Anyone had a single port on VG248 stuck offhook before? I've tried
disabling the port and re-enabling. The Fax machine connected to it is
on hook.
Trying to cover all the bases before I ask them to check the wiring.
--
Ed Leatherman
IP Telephony Coordinator
West Virginia University
Telecommunications and Network Operations
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
|
|
|
|
|