|
Home > Archive > Voice over IP Cisco > May 2006 > NM-HDV with SIMMS
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| Stu Packett 2006-05-18, 1:11 pm |
| I have a few NM-HDVs with different SIMM configurations. One set has 5
SIMMS and the 'sh diag' says they are PVDM-12 SIMMs. The other set has
4 SIMMS, but the 'sh diag' does not show the PVDM-12s. Could the 4
SIMMs on the NM-HDV be something different than the PVDM-12s? I went to
the link below, but could not gather the info I needed. So, are these
PVDM-12s or another part?
http://www.cisco.com/en/US/tech/tk6...tech_note09186a
00800b65d6.shtml
Thanks in advance.
| |
| Rick Truong 2006-05-18, 1:11 pm |
| Hi Stu,
Normally, they are PVDM-12's. What does it say exactly when you do the sh
diag? With 5 PVDM's, it must mean you have a NM-HDV-2E1-60 card, with 4,
you might have a NM-HDV-2T1-48. It could be PVDM-4, 8, or something else.
Also, there might be a possibility that the NM-HDV is not functioning
properly. Just a guess. Does the NM have a VWIC-2MFT-T1 installed in it as
well? The PVDM's might not show up if you don't have the VWIC in it.
You could try taking out the 5 x PVDM-12's out of the one that recognizes
the PVDM-12's, and putting the 4 SIMMs into it and see if they are
recognized as PVDM-12's
* We buy and sell networking equipment. Please contact me if you have any
offers or are interested in purchasing. *
* VG224's and VG248's NEW IN BOX in stock! *
Thanks,
Rick Truong
TruTech Systems
39263 Half Moon Circle
Murrieta, CA 92563
Office: 951.696.3688
Mobile: 951.440.8711
AIM: ricktrutek
E-Mail: rick@trutechsystems.net
WEB: http://www.trutechsystems.net
_____
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Stu Packett
Sent: Thursday, May 18, 2006 8:56 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] NM-HDV with SIMMS
I have a few NM-HDVs with different SIMM configurations. One set has 5
SIMMS and the 'sh diag' says they are PVDM-12 SIMMs. The other set has 4
SIMMS, but the 'sh diag' does not show the PVDM-12s. Could the 4 SIMMs on
the NM-HDV be something different than the PVDM-12s? I went to the link
below, but could not gather the info I needed. So, are these PVDM-12s or
another part?
<http://www.cisco.com/en/US/tech/tk6...h_note09186a008
00b65d6.shtml>
http://www.cisco.com/en/US/tech/tk6..._note09186a0080
0b65d6.shtml
Thanks in advance.
| |
| Stu Packett 2006-05-18, 1:11 pm |
| The NM-HDVs with 4 SIMMS actually had a VWIC-1MFT-T1 installed in it,
but we moved the VWIC-1MFT-T1 to a 2811. With this information, what do
we need to do to make the 4 PVDM-12s appear in a 'sh diag' or will they
only show up if there is VWIC installed with it?
________________________________
From: Rick Truong [mailto:rick@trutechsystems.net]
Sent: Thursday, May 18, 2006 9:11 AM
To: Stu Packett; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] NM-HDV with SIMMS
Hi Stu,
Normally, they are PVDM-12's. What does it say exactly when you do the
sh diag? With 5 PVDM's, it must mean you have a NM-HDV-2E1-60 card,
with 4, you might have a NM-HDV-2T1-48. It could be PVDM-4, 8, or
something else.
Also, there might be a possibility that the NM-HDV is not functioning
properly. Just a guess. Does the NM have a VWIC-2MFT-T1 installed in
it as well? The PVDM's might not show up if you don't have the VWIC in
it.
You could try taking out the 5 x PVDM-12's out of the one that
recognizes the PVDM-12's, and putting the 4 SIMMs into it and see if
they are recognized as PVDM-12's
* We buy and sell networking equipment. Please contact me if you have
any offers or are interested in purchasing. *
* VG224's and VG248's NEW IN BOX in stock! *
Thanks,
Rick Truong
TruTech Systems
39263 Half Moon Circle
Murrieta, CA 92563
Office: 951.696.3688
Mobile: 951.440.8711
AIM: ricktrutek
E-Mail: rick@trutechsystems.net
WEB: http://www.trutechsystems.net
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Stu Packett
Sent: Thursday, May 18, 2006 8:56 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] NM-HDV with SIMMS
I have a few NM-HDVs with different SIMM configurations. One set has 5
SIMMS and the 'sh diag' says they are PVDM-12 SIMMs. The other set has
4 SIMMS, but the 'sh diag' does not show the PVDM-12s. Could the 4
SIMMs on the NM-HDV be something different than the PVDM-12s? I went to
the link below, but could not gather the info I needed. So, are these
PVDM-12s or another part?
http://www.cisco.com/en/US/tech/tk6...tech_note09186a
00800b65d6.shtml
<http://www.cisco.com/en/US/tech/tk6..._tech_note09186
a00800b65d6.shtml>
Thanks in advance.
| |
| Rick Truong 2006-05-18, 1:11 pm |
| Hi Stu,
I am sure that is the cause. Install a VWIC-2MFT-T1 and all 4 x PVDM-12's
should show up when you do a sh diag. Or if you just want to make sure they
are PVDM-12's, you could just put the VWIC-2MFT-E1 from the other NM into it
for a quick test to see if they are PVDM-12's. But yes, if you want to
actually use the NM-HDV-48, you will have to purchase or get your hands on a
VWIC and install it into the NM.
* We buy and sell networking equipment. Please contact me if you have any
offers or are interested in purchasing. *
* VG224's and VG248's NEW IN BOX in stock! *
Thanks,
Rick Truong
TruTech Systems
39263 Half Moon Circle
Murrieta, CA 92563
Office: 951.696.3688
Mobile: 951.440.8711
AIM: ricktrutek
E-Mail: rick@trutechsystems.net
WEB: http://www.trutechsystems.net
_____
From: Stu Packett [mailto:SPackett@fenwick.com]
Sent: Thursday, May 18, 2006 9:29 AM
To: Rick Truong; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] NM-HDV with SIMMS
The NM-HDVs with 4 SIMMS actually had a VWIC-1MFT-T1 installed in it, but we
moved the VWIC-1MFT-T1 to a 2811. With this information, what do we need to
do to make the 4 PVDM-12s appear in a 'sh diag' or will they only show up if
there is VWIC installed with it?
_____
From: Rick Truong [mailto:rick@trutechsystems.net]
Sent: Thursday, May 18, 2006 9:11 AM
To: Stu Packett; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] NM-HDV with SIMMS
Hi Stu,
Normally, they are PVDM-12's. What does it say exactly when you do the sh
diag? With 5 PVDM's, it must mean you have a NM-HDV-2E1-60 card, with 4,
you might have a NM-HDV-2T1-48. It could be PVDM-4, 8, or something else.
Also, there might be a possibility that the NM-HDV is not functioning
properly. Just a guess. Does the NM have a VWIC-2MFT-T1 installed in it as
well? The PVDM's might not show up if you don't have the VWIC in it.
You could try taking out the 5 x PVDM-12's out of the one that recognizes
the PVDM-12's, and putting the 4 SIMMs into it and see if they are
recognized as PVDM-12's
* We buy and sell networking equipment. Please contact me if you have any
offers or are interested in purchasing. *
* VG224's and VG248's NEW IN BOX in stock! *
Thanks,
Rick Truong
TruTech Systems
39263 Half Moon Circle
Murrieta, CA 92563
Office: 951.696.3688
Mobile: 951.440.8711
AIM: ricktrutek
E-Mail: rick@trutechsystems.net
WEB: http://www.trutechsystems.net
_____
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Stu Packett
Sent: Thursday, May 18, 2006 8:56 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] NM-HDV with SIMMS
I have a few NM-HDVs with different SIMM configurations. One set has 5
SIMMS and the 'sh diag' says they are PVDM-12 SIMMs. The other set has 4
SIMMS, but the 'sh diag' does not show the PVDM-12s. Could the 4 SIMMs on
the NM-HDV be something different than the PVDM-12s? I went to the link
below, but could not gather the info I needed. So, are these PVDM-12s or
another part?
<http://www.cisco.com/en/US/tech/tk6...h_note09186a008
00b65d6.shtml>
http://www.cisco.com/en/US/tech/tk6..._note09186a0080
0b65d6.shtml
Thanks in advance.
|
|
|
|
|