| Frazee, Timothy 2006-05-18, 1:11 pm |
| Dito,
I had an install were the customer would press a button, it would call a
certain phone (normally the operator) and they would talk about as to
who the outside person was and whatever. Then the operator would dial a
code, without hanging up on the outside use, and this code would signal
the gate opener to do its thing. This setup is way easier than I first
thought. Just a PLAR config on the FXS port to the desired destination.
I made it ring up a line group where it would ring a couple of people as
so the person outside would get better response than before. It works
perfectly.
Now I can't remember the model exactly, but it was an older AT&T gate
opener deal. It doesn't really matter as long as it has connectivity via
FXS.
Timothy Frazee
Network Solutions
314.249.8697 cellular phone
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jim McBurnett
Sent: Thursday, May 18, 2006 8:15 AM
To: Scott O'Donnell; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Looking for a Outdoor intercom and Door
locktointegrate.
another thought think of an Analog phone link-- Use an FXS port and a
PLAR connection to a number...
I have this at a customer location.. But the gate is so far away they
are using a Bell Analog line and the device calls a set # that rings a
number that comes up on all phones.
The users Press 5 to open the gate when they pickup...
I can't find the name right now... But I'll unicast it when I do...
J
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Scott O'Donnell
Sent: Thursday, May 18, 2006 9:07 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Looking for a Outdoor intercom and Door lock
tointegrate.
Does anyone have a recommendation for an outdoor intercom and door latch
that can be triggered through an ip phone/gateway setup.
Scott
This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
|