|
Home > Archive > Voice over IP Cisco > May 2006 > Direct Dialing a trunk
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Direct Dialing a trunk
|
|
| Olson, Jeffrey 2006-05-23, 1:11 pm |
| I need to find out how to direct dial a trunk on a cisco 4.1 call
manager. Does anyone have any ideas?
Jeff
****************************************
****************************
CONFIDENTIALITY NOTICE:
This E-mail transmission contains information from Mortgage Lenders NetworkUSA, Inc. which is confidential and legally privileged. The information isintended only for the use of the individual or entity named on this E-mail.. If you are not the intended recipient, you are hereby notified that disclosing, copying, distributing, or taking any action in reliance on the contents of this information is strictly prohibited, and that the E-mail should be returned to this company immediately. If you have received this E-mail in error, please contact the sender immediately.
| |
| Lelio Fulgenzi 2006-05-23, 1:11 pm |
| Direct Dialing a trunkThere was an issue in 3.x that prevented trunks from being in different route groups (or perhaps it wouldn't allow you to assign a trunk to a pattern that was already assigned to a group), so I had to create a seperate route group for each trunk and then create a set of test patterns that would be routed to a specific route list which would test only one trunk.
I'll bet in 4.1 you can create a route pattern and assign a trunk for that pattern itself.
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Sanity First : Number of days with fewer than
50 messages in my inbox at the end of the day: buffer overrun
----- Original Message -----
From: Olson, Jeffrey
To: cisco-voip@puck.nether.net
Sent: Tuesday, May 23, 2006 12:51 PM
Subject: [cisco-voip] Direct Dialing a trunk
I need to find out how to direct dial a trunk on a cisco 4.1 call manager. Does anyone have any ideas?
Jeff
****************************************
****************************
CONFIDENTIALITY NOTICE:
This E-mail transmission contains information from Mortgage Lenders Network USA, Inc. which is confidential and legally privileged. The information is intended only for the use of the individual or entity named on this E-mail. If you are not the intended recipient, you are hereby notified that disclosing, copying, distributing, or taking any action in reliance on the contents of this information is strictly prohibited, and that the E-mail should be returned to this company immediately. If you have received this E-mail in error, please contact the sender immediately.
------------------------------------------------------------------------------
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|