|
Home > Archive > Voice over IP Cisco > June 2006 > AD plugin on a W2k3 Domain
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
AD plugin on a W2k3 Domain
|
|
| Jason Burton 2006-06-13, 1:11 pm |
| I'm trying to install the AD plugin and keep getting the following error:
Error:Setup failed to connect. Please enter your Host Name, Port Number, Directory Administrator DN and Password again!
I've verified these 100 times over and still no luck. This is the first time I've tried this to a widnows 2003 domain. Any ideas?
Thanks in advance!!
| |
| Voll, Scott 2006-06-13, 1:11 pm |
| Is there any pix between the CM and AD? If so, we ran into a problem
with the fixup 389.
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jason Burton
Sent: Tuesday, June 13, 2006 7:43 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] AD plugin on a W2k3 Domain
I'm trying to install the AD plugin and keep getting the following
error:
Error:Setup failed to connect. Please enter your Host Name, Port Number,
Directory Administrator DN and Password again!
I've verified these 100 times over and still no luck. This is the first
time I've tried this to a widnows 2003 domain. Any ideas?
Thanks in advance!!
| |
| Jason Burton 2006-06-13, 1:11 pm |
| Nope, just a router on a stick.
From: Voll, Scott
Sent: Tue 6/13/2006 10:50 AM
To: Jason Burton; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] AD plugin on a W2k3 Domain
Is there any pix between the CM and AD? If so, we ran into a problem with the fixup 389.
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jason Burton
Sent: Tuesday, June 13, 2006 7:43 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] AD plugin on a W2k3 Domain
I'm trying to install the AD plugin and keep getting the following error:
Error:Setup failed to connect. Please enter your Host Name, Port Number, Directory Administrator DN and Password again!
I've verified these 100 times over and still no luck. This is the first time I've tried this to a widnows 2003 domain. Any ideas?
Thanks in advance!!
| |
| Ryan Ratliff 2006-06-13, 1:11 pm |
| Get a sniffer capture, look at the ldap packets and see what's going on.
-Ryan
On Jun 13, 2006, at 10:52 AM, Jason Burton wrote:
Nope, just a router on a stick.
From: Voll, Scott
Sent: Tue 6/13/2006 10:50 AM
To: Jason Burton; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] AD plugin on a W2k3 Domain
Is there any pix between the CM and AD? If so, we ran into a problem
with the fixup 389.
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-
bounces@puck.nether.net] On Behalf Of Jason Burton
Sent: Tuesday, June 13, 2006 7:43 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] AD plugin on a W2k3 Domain
I'm trying to install the AD plugin and keep getting the following
error:
Error:Setup failed to connect. Please enter your Host Name, Port
Number, Directory Administrator DN and Password again!
I've verified these 100 times over and still no luck. This is the
first time I've tried this to a widnows 2003 domain. Any ideas?
Thanks in advance!!
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Kevin Thorngren 2006-06-13, 1:11 pm |
| The quickest way to isolate the issue is with a packet capture of the
Publisher when doing the AD Plugin. Looking at the LDAP packets should
help you see what the failure is.
Kevin
On Jun 13, 2006, at 10:52 AM, Jason Burton wrote:
> Nope, just a router on a stick.
>
> From: Voll, Scott
> Sent: Tue 6/13/2006 10:50 AM
> To: Jason Burton; cisco-voip@puck.nether.net
> Subject: RE: [cisco-voip] AD plugin on a W2k3 Domain
>
> Is there any pix between the CM and AD?_ If so, we ran into a problem
> with the fixup 389.
> _
>
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jason Burton
> Sent: Tuesday, June 13, 2006 7:43 AM
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] AD plugin on a W2k3 Domain
> _
> _I'm trying to install the AD plugin and keep getting the following
> error:
> _
> Error:Setup failed to connect. Please enter your Host Name, Port
> Number, Directory Administrator DN and Password again!
> _
> I've verified these 100 times over and still no luck._ This is the
> first time I've tried this to a widnows 2003 domain._ Any ideas?
> _
> Thanks in advance!!
> ________________________________________
________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Jason Burton 2006-06-13, 1:11 pm |
| Thanks, downloading Ethereal now.
From: Kevin Thorngren
Sent: Tue 6/13/2006 11:01 AM
To: Jason Burton
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
The quickest way to isolate the issue is with a packet capture of the
Publisher when doing the AD Plugin. Looking at the LDAP packets should
help you see what the failure is.
Kevin
On Jun 13, 2006, at 10:52 AM, Jason Burton wrote:
> Nope, just a router on a stick.
>
> From: Voll, Scott
> Sent: Tue 6/13/2006 10:50 AM
> To: Jason Burton; cisco-voip@puck.nether.net
> Subject: RE: [cisco-voip] AD plugin on a W2k3 Domain
>
> Is there any pix between the CM and AD? If so, we ran into a problem
> with the fixup 389.
>
>
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jason Burton
> Sent: Tuesday, June 13, 2006 7:43 AM
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] AD plugin on a W2k3 Domain
>
> I'm trying to install the AD plugin and keep getting the following
> error:
>
> Error:Setup failed to connect. Please enter your Host Name, Port
> Number, Directory Administrator DN and Password again!
>
> I've verified these 100 times over and still no luck. This is the
> first time I've tried this to a widnows 2003 domain. Any ideas?
>
> Thanks in advance!!
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Jason Burton 2006-06-13, 1:11 pm |
| Well after doing the packet capture I'm getting invalid credentials error in the Bind result.
It's LDAPErr DSID-0c09334. What is the correct format for AD Admin DN?
CN=USER, OU=Container, DC=domain, DC=Domain?
From: Jason Burton
Sent: Tue 6/13/2006 11:08 AM
To: Kevin Thorngren
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
Thanks, downloading Ethereal now.
From: Kevin Thorngren
Sent: Tue 6/13/2006 11:01 AM
To: Jason Burton
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
The quickest way to isolate the issue is with a packet capture of the
Publisher when doing the AD Plugin. Looking at the LDAP packets should
help you see what the failure is.
Kevin
On Jun 13, 2006, at 10:52 AM, Jason Burton wrote:
> Nope, just a router on a stick.
>
> From: Voll, Scott
> Sent: Tue 6/13/2006 10:50 AM
> To: Jason Burton; cisco-voip@puck.nether.net
> Subject: RE: [cisco-voip] AD plugin on a W2k3 Domain
>
> Is there any pix between the CM and AD? If so, we ran into a problem
> with the fixup 389.
>
>
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jason Burton
> Sent: Tuesday, June 13, 2006 7:43 AM
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] AD plugin on a W2k3 Domain
>
> I'm trying to install the AD plugin and keep getting the following
> error:
>
> Error:Setup failed to connect. Please enter your Host Name, Port
> Number, Directory Administrator DN and Password again!
>
> I've verified these 100 times over and still no luck. This is the
> first time I've tried this to a widnows 2003 domain. Any ideas?
>
> Thanks in advance!!
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Ryan Ratliff 2006-06-13, 1:11 pm |
| Try CN=user, CN=container,DC=domain,DC=com.
-Ryan
On Jun 13, 2006, at 11:46 AM, Jason Burton wrote:
Well after doing the packet capture I'm getting invalid credentials
error in the Bind result.
It's LDAPErr DSID-0c09334. What is the correct format for AD Admin DN?
CN=USER, OU=Container, DC=domain, DC=Domain?
From: Jason Burton
Sent: Tue 6/13/2006 11:08 AM
To: Kevin Thorngren
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
Thanks, downloading Ethereal now.
From: Kevin Thorngren
Sent: Tue 6/13/2006 11:01 AM
To: Jason Burton
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
The quickest way to isolate the issue is with a packet capture of the
Publisher when doing the AD Plugin. Looking at the LDAP packets
should help you see what the failure is. Kevin On Jun 13, 2006, at
10:52 AM, Jason Burton wrote: > Nope, just a router on a stick. > >
From: Voll, Scott > Sent: Tue 6/13/2006 10:50 AM > To: Jason Burton;
cisco-voip@puck.nether.net > Subject: RE: [cisco-voip] AD plugin on a
W2k3 Domain > > Is there any pix between the CM and AD? If so, we
ran into a problem > with the fixup 389. > > > From: cisco-voip-
bounces@puck.nether.net > [mailto:cisco-voip-bounces@puck.nether.net]
On Behalf Of Jason Burton > Sent: Tuesday, June 13, 2006 7:43 AM >
To: cisco-voip@puck.nether.net > Subject: [cisco-voip] AD plugin on a
W2k3 Domain > > I'm trying to install the AD plugin and keep
getting the following > error: > > Error:Setup failed to connect.
Please enter your Host Name, Port > Number, Directory Administrator
DN and Password again! > > I've verified these 100 times over and
still no luck. This is the > first time I've tried this to a widnows
2003 domain. Any ideas? > > Thanks in advance!! >
________________________________________
_______ > cisco-voip mailing
list > cisco-voip@puck.nether.net > https://puck.nether.net/mailman/
listinfo/cisco-voip
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Jason Burton 2006-06-13, 1:11 pm |
| Nope same result.
From: Ryan Ratliff
Sent: Tue 6/13/2006 11:51 AM
To: Jason Burton
Cc: Kevin Thorngren; cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
Try CN=user, CN=container,DC=domain,DC=com.
-Ryan
On Jun 13, 2006, at 11:46 AM, Jason Burton wrote:
Well after doing the packet capture I'm getting invalid credentials
error in the Bind result.
It's LDAPErr DSID-0c09334. What is the correct format for AD Admin DN?
CN=USER, OU=Container, DC=domain, DC=Domain?
From: Jason Burton
Sent: Tue 6/13/2006 11:08 AM
To: Kevin Thorngren
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
Thanks, downloading Ethereal now.
From: Kevin Thorngren
Sent: Tue 6/13/2006 11:01 AM
To: Jason Burton
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
The quickest way to isolate the issue is with a packet capture of the
Publisher when doing the AD Plugin. Looking at the LDAP packets
should help you see what the failure is. Kevin On Jun 13, 2006, at
10:52 AM, Jason Burton wrote: > Nope, just a router on a stick. > >
From: Voll, Scott > Sent: Tue 6/13/2006 10:50 AM > To: Jason Burton;
cisco-voip@puck.nether.net > Subject: RE: [cisco-voip] AD plugin on a
W2k3 Domain > > Is there any pix between the CM and AD? If so, we
ran into a problem > with the fixup 389. > > > From: cisco-voip-
bounces@puck.nether.net > [mailto:cisco-voip-bounces@puck.nether.net]
On Behalf Of Jason Burton > Sent: Tuesday, June 13, 2006 7:43 AM >
To: cisco-voip@puck.nether.net > Subject: [cisco-voip] AD plugin on a
W2k3 Domain > > I'm trying to install the AD plugin and keep
getting the following > error: > > Error:Setup failed to connect.
Please enter your Host Name, Port > Number, Directory Administrator
DN and Password again! > > I've verified these 100 times over and
still no luck. This is the > first time I've tried this to a widnows
2003 domain. Any ideas? > > Thanks in advance!! >
________________________________________
_______ > cisco-voip mailing
list > cisco-voip@puck.nether.net > https://puck.nether.net/mailman/
listinfo/cisco-voip
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Kevin Thorngren 2006-06-13, 1:11 pm |
| The format you use depends on the Object Class of each Container.
Object Class of the container using the following steps:
- Open Active Directory Users and Computers
- Click on View and check mark Advanced Features
- Right click on each container and select Properties
- Select the Object tab
Note the object class for each container and use that to build your
Admin DN.
Kevin
On Jun 13, 2006, at 11:55 AM, Jason Burton wrote:
> Nope same result.
>
> From: Ryan Ratliff
> Sent: Tue 6/13/2006 11:51 AM
> To: Jason Burton
> Cc: Kevin Thorngren; cisco-voip Voip
> Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
>
> Try CN=user, CN=container,DC=domain,DC=com.
>
>
> -Ryan
>
> On Jun 13, 2006, at 11:46 AM, Jason Burton wrote:
>
> Well after doing the packet capture I'm getting invalid credentials
> error in the Bind result.
>
> It's LDAPErr DSID-0c09334. What is the correct format for AD Admin DN?
>
> CN=USER, OU=Container, DC=domain, DC=Domain?
>
> From: Jason Burton
> Sent: Tue 6/13/2006 11:08 AM
> To: Kevin Thorngren
> Cc: cisco-voip Voip
> Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
>
> Thanks, downloading Ethereal now.
>
> From: Kevin Thorngren
> Sent: Tue 6/13/2006 11:01 AM
> To: Jason Burton
> Cc: cisco-voip Voip
> Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
>
> The quickest way to isolate the issue is with a packet capture of the
> Publisher when doing the AD Plugin. Looking at the LDAP packets
> should help you see what the failure is. Kevin On Jun 13, 2006, at
> 10:52 AM, Jason Burton wrote: > Nope, just a router on a stick. > >
> From: Voll, Scott > Sent: Tue 6/13/2006 10:50 AM > To: Jason Burton;
> cisco-voip@puck.nether.net > Subject: RE: [cisco-voip] AD plugin on a
> W2k3 Domain > > Is there any pix between the CM and AD? If so, we
> ran into a problem > with the fixup 389. > > > From: cisco-voip-
> bounces@puck.nether.net > [mailto:cisco-voip-bounces@puck.nether.net]
> On Behalf Of Jason Burton > Sent: Tuesday, June 13, 2006 7:43 AM >
> To: cisco-voip@puck.nether.net > Subject: [cisco-voip] AD plugin on a
> W2k3 Domain > > I'm trying to install the AD plugin and keep
> getting the following > error: > > Error:Setup failed to connect.
> Please enter your Host Name, Port > Number, Directory Administrator
> DN and Password again! > > I've verified these 100 times over and
> still no luck. This is the > first time I've tried this to a widnows
> 2003 domain. Any ideas? > > Thanks in advance!! >
> ________________________________________
_______ > cisco-voip mailing
> list > cisco-voip@puck.nether.net > https://puck.nether.net/mailman/
> listinfo/cisco-voip
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Johan Bloemhard 2006-06-16, 7:11 am |
| Are you using SSL or rather LDAPS? I know that AD 2003 has some
differences in what you can do through LDAP-requiring LDAPS for some
operations.
Johan Bloemhard
Senior Information Technology Specialist
___________________________________
Silver Falls School District 4J
802 Schlador Street
Silverton, OR 97381
w: 503.873.6331
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jason Burton
Sent: Tuesday, June 13, 2006 8:55 AM
To: Ryan Ratliff
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
Importance: Low
Nope same result.
________________________________
From: Ryan Ratliff
Sent: Tue 6/13/2006 11:51 AM
To: Jason Burton
Cc: Kevin Thorngren; cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
Try CN=user, CN=container,DC=domain,DC=com.
-Ryan
On Jun 13, 2006, at 11:46 AM, Jason Burton wrote:
Well after doing the packet capture I'm getting invalid credentials
error in the Bind result.
It's LDAPErr DSID-0c09334. What is the correct format for AD Admin DN?
CN=USER, OU=Container, DC=domain, DC=Domain?
From: Jason Burton
Sent: Tue 6/13/2006 11:08 AM
To: Kevin Thorngren
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
Thanks, downloading Ethereal now.
From: Kevin Thorngren
Sent: Tue 6/13/2006 11:01 AM
To: Jason Burton
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
The quickest way to isolate the issue is with a packet capture of the
Publisher when doing the AD Plugin. Looking at the LDAP packets
should help you see what the failure is. Kevin On Jun 13, 2006, at
10:52 AM, Jason Burton wrote: > Nope, just a router on a stick. > >
From: Voll, Scott > Sent: Tue 6/13/2006 10:50 AM > To: Jason Burton;
cisco-voip@puck.nether.net > Subject: RE: [cisco-voip] AD plugin on a
W2k3 Domain > > Is there any pix between the CM and AD? If so, we
ran into a problem > with the fixup 389. > > > From: cisco-voip-
bounces@puck.nether.net > [mailto:cisco-voip-bounces@puck.nether.net]
On Behalf Of Jason Burton > Sent: Tuesday, June 13, 2006 7:43 AM >
To: cisco-voip@puck.nether.net > Subject: [cisco-voip] AD plugin on a
W2k3 Domain > > I'm trying to install the AD plugin and keep
getting the following > error: > > Error:Setup failed to connect.
Please enter your Host Name, Port > Number, Directory Administrator
DN and Password again! > > I've verified these 100 times over and
still no luck. This is the > first time I've tried this to a widnows
2003 domain. Any ideas? > > Thanks in advance!! >
________________________________________
_______ > cisco-voip mailing
list > cisco-voip@puck.nether.net > https://puck.nether.net/mailman/
listinfo/cisco-voip
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
______________________
Disclaimer: This message may be legally privileged and/or is intended only for the use of the addressee(s). The content and views expressed in this email may represent the views of the sender and not those of Silver Falls School District.
|
|
|
|
|