Voice over IP Cisco - example of h323 using pots lines

Author

example of h323 using pots lines

James Grace

2006-07-25, 7:11 pm

Im doing a cme with 4 incoming pots lines. I know I need to send out bound
call to the bottom pots line. The carrier is sending call in on the first
line. Not really sure what to do with multiple lines

Kevin Thorngren

2006-07-25, 7:11 pm

You can use the "preference" option in your dial peers to route the
outbound calls to multiple ports. Take a look here for an example:
http://www.cisco.com/univercd/cc/td...oftware/ios123/
123cgcr/vvfax_c/int_c/dpeer_c/dp_confg.htm#wp1068229

Kevin
On Jul 25, 2006, at 5:33 PM, James Grace wrote:

> Im doing a cme with 4 incoming pots lines._ I know I need to send out
> bound call to the bottom pots line._ The carrier is sending call in on
> the first line._ Not really sure what to do with multiple lines
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip