|
Home > Archive > Voice over IP Cisco > July 2006 > FW: when i call in
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
FW: when i call in
|
|
| James Grace 2006-07-26, 7:11 pm |
| After further troubleshooting... When I set the connection plar to a ip
phone it rings .but when I send it to just the AA or an ephon-dn (that frd
all to AA ) it goes off hook and then dead air
_____
From: James Grace [mailto:jgrace@digitel.net]
Sent: Wednesday, July 26, 2006 6:17 PM
To: 'cisco-voip@puck.nether.net'
Subject: when i call in
We are calling into our phone system cme. And for some reason the
connection plar 750 is not working. The calls coming and the voice port
goes off hook. And then dead air. Internally I can call 750 (my aa) and I
can call out just fine. Any suggestions
!
voice-port 0/1/0
connection plar 750
caller-id enable
!
voice-port 0/1/1
connection plar 750
caller-id enable
!
voice-port 0/1/2
connection plar 750
caller-id enable
!
voice-port 0/1/3
connection plar 750
caller-id enable
!
voice-port 0/2/0
dial-peer voice 10 pots
corlist outgoing loc-LD-800-only-css
translation-profile outgoing outgoingCID
preference 3
destination-pattern 9[2-9].........$
port 0/1/0
forward-digits 10
!
dial-peer voice 11 pots
corlist outgoing loc-LD-800-only-css
preference 3
destination-pattern 9[2-9]......$
port 0/1/0
forward-digits 7
!
dial-peer voice 12 pots
corlist outgoing loc-LD-800-only-css
preference 3
destination-pattern 911
port 0/1/0
forward-digits all
!
dial-peer voice 13 pots
corlist outgoing loc-LD-800-only-css
preference 3
destination-pattern 9911
port 0/1/0
forward-digits 3
!
dial-peer voice 14 pots
corlist outgoing loc-LD-800-only-css
translation-profile outgoing outgoingCID
preference 3
destination-pattern 91[2-9]..[2-9]......$
port 0/1/0
forward-digits 10
!
dial-peer voice 15 pots
corlist outgoing Unrestricted-css
translation-profile outgoing outgoingCID
preference 3
destination-pattern 9011T
port 0/1/0
prefix 011
!
| |
| Kevin Thorngren 2006-07-26, 7:11 pm |
| What AA are you using?
Use "sh voice call summary" to see what codec is in use but the voice
port during the call.
Kevin
On Jul 26, 2006, at 6:33 PM, James Grace wrote:
>
> After further troubleshooting……._ When I set the connection plar to a
> ip phone_ it rings …but when I send it to just the AA or an ephon-dn
> (that frd all to AA )_ it goes off hook and then dead air
> _
>
> From: James Grace [mailto:jgrace@digitel.net]
> Sent: Wednesday, July 26, 2006 6:17 PM
> To: 'cisco-voip@puck.nether.net'
> Subject: when i call in
> _
> We are calling into our phone system cme._ And for some reason the
> connection plar 750 is not working._ The calls coming and the voice
> port goes off hook._ And then dead air._ Internally I can call 750 (my
> aa)_ and I can call out just fine.__ Any suggestions
> ________
> !________
> voice-port 0/1/0
> _connection plar 750
> _caller-id enable
> !________
> voice-port 0/1/1
> _connection plar 750
> _caller-id enable
> !________
> voice-port 0/1/2
> _connection plar 750
> _caller-id enable
> !________
> voice-port 0/1/3
> _connection plar 750
> _caller-id enable
> !________
> voice-port 0/2/0
> _
> dial-peer voice 10 pots
> _corlist outgoing loc-LD-800-only-css
> _translation-profile outgoing outgoingCID
> _preference 3
> _destination-pattern 9[2-9].........$
> _port 0/1/0
> _forward-digits 10
> !
> dial-peer voice 11 pots
> _corlist outgoing loc-LD-800-only-css
> _preference 3
> _destination-pattern 9[2-9]......$
> _port 0/1/0
> _forward-digits 7
> !
> dial-peer voice 12 pots
> _corlist outgoing loc-LD-800-only-css
> _preference 3
> _destination-pattern 911
> _port 0/1/0
> _forward-digits all
> !
> dial-peer voice 13 pots
> _corlist outgoing loc-LD-800-only-css
> _preference 3
> _destination-pattern 9911
> _port 0/1/0
> _forward-digits 3
> !
> dial-peer voice 14 pots
> _corlist outgoing loc-LD-800-only-css
> _translation-profile outgoing outgoingCID
> _preference 3
> _destination-pattern 91[2-9]..[2-9]......$
> _port 0/1/0
> _forward-digits 10
> !
> dial-peer voice 15 pots
> _corlist outgoing Unrestricted-css
> _translation-profile outgoing outgoingCID
> _preference 3
> _destination-pattern 9011T
> _port 0/1/0
> _prefix 011
> !
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Ted Nugent 2006-07-26, 7:11 pm |
| not sure what AA you're using but see if this helps
http://www.ciscotaccc.com/kaidara-a...?case=K19651580
--- James Grace <jgrace@digitel.net> wrote:
> After further troubleshooting... When I set the
> connection plar to a ip
> phone it rings .but when I send it to just the AA
> or an ephon-dn (that frd
> all to AA ) it goes off hook and then dead air
>
>
>
> _____
>
> From: James Grace [mailto:jgrace@digitel.net]
> Sent: Wednesday, July 26, 2006 6:17 PM
> To: 'cisco-voip@puck.nether.net'
> Subject: when i call in
>
>
>
> We are calling into our phone system cme. And for
> some reason the
> connection plar 750 is not working. The calls
> coming and the voice port
> goes off hook. And then dead air. Internally I can
> call 750 (my aa) and I
> can call out just fine. Any suggestions
>
>
>
> !
>
> voice-port 0/1/0
>
> connection plar 750
>
> caller-id enable
>
> !
>
> voice-port 0/1/1
>
> connection plar 750
>
> caller-id enable
>
> !
>
> voice-port 0/1/2
>
> connection plar 750
>
> caller-id enable
>
> !
>
> voice-port 0/1/3
>
> connection plar 750
>
> caller-id enable
>
> !
>
> voice-port 0/2/0
>
>
>
> dial-peer voice 10 pots
>
> corlist outgoing loc-LD-800-only-css
>
> translation-profile outgoing outgoingCID
>
> preference 3
>
> destination-pattern 9[2-9].........$
>
> port 0/1/0
>
> forward-digits 10
>
> !
>
> dial-peer voice 11 pots
>
> corlist outgoing loc-LD-800-only-css
>
> preference 3
>
> destination-pattern 9[2-9]......$
>
> port 0/1/0
>
> forward-digits 7
>
> !
>
> dial-peer voice 12 pots
>
> corlist outgoing loc-LD-800-only-css
>
> preference 3
>
> destination-pattern 911
>
> port 0/1/0
>
> forward-digits all
>
> !
>
> dial-peer voice 13 pots
>
> corlist outgoing loc-LD-800-only-css
>
> preference 3
>
> destination-pattern 9911
>
> port 0/1/0
>
> forward-digits 3
>
> !
>
> dial-peer voice 14 pots
>
> corlist outgoing loc-LD-800-only-css
>
> translation-profile outgoing outgoingCID
>
> preference 3
>
> destination-pattern 91[2-9]..[2-9]......$
>
> port 0/1/0
>
> forward-digits 10
>
> !
>
> dial-peer voice 15 pots
>
> corlist outgoing Unrestricted-css
>
> translation-profile outgoing outgoingCID
>
> preference 3
>
> destination-pattern 9011T
>
> port 0/1/0
>
> prefix 011
>
> !
>
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
________________________________________
__________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
| |
| James Grace 2006-07-27, 1:11 pm |
| Thank you for your help. We found the issue. We were using enable caller
ID on the voiceport and there is a bug in 12.4.8 had to upgrade to 12.4.8a
_____
From: Kevin Thorngren [mailto:kthorngr@cisco.com]
Sent: Wednesday, July 26, 2006 8:28 PM
To: James Grace
Subject: Re: [cisco-voip] FW: when i call in
Again, it is the one I noted below: "sh voice call summary"
On Jul 26, 2006, at 8:00 PM, James Grace wrote:
I would think its g711 these are just regular pots lines coming into my
fx0o ports. Whats the cmd to verify
From: Kevin Thorngren [mailto:kthorngr@cisco.com]
Sent: Wednesday, July 26, 2006 7:47 PM
To: James Grace
Subject: Re: [cisco-voip] FW: when i call in
CUE AA supports only G.711.
http://www.cisco.com/en/US/products...s_implementatio
n_design_guide_chapter09186a00804993c0.html#wp1011776
What codec is your call using?
Kevin
On Jul 26, 2006, at 7:18 PM, James Grace wrote:
Im using cue 3.4 aa internally it works just fine
From:Kevin Thorngren [mailto:kthorngr@cisco.com]
Sent:Wednesday, July 26, 2006 6:52 PM
To:James Grace
Cc:cisco-voip@puck.nether.net
Subject:Re: [cisco-voip] FW: when i call in
What AA are you using?
Use "sh voice call summary" to see what codec is in use but the voice port
during the call.
Kevin
On Jul 26, 2006, at 6:33 PM, James Grace wrote:
After further troubleshooting... When I set the connection plar to a ip
phone it rings .but when I send it to just the AA or an ephon-dn (that frd
all to AA ) it goes off hook and then dead air
From:James Grace [mailto:jgrace@digitel.net]
Sent:Wednesday, July 26, 2006 6:17 PM
To:'cisco-voip@puck.nether.net'
Subject:when i call in
We are calling into our phone system cme. And for some reason the
connection plar 750 is not working. The calls coming and the voice port
goes off hook. And then dead air. Internally I can call 750 (my aa) and I
can call out just fine. Any suggestions
!
voice-port 0/1/0
connection plar 750
caller-id enable
!
voice-port 0/1/1
connection plar 750
caller-id enable
!
voice-port 0/1/2
connection plar 750
caller-id enable
!
voice-port 0/1/3
connection plar 750
caller-id enable
!
voice-port 0/2/0
dial-peer voice 10 pots
corlist outgoing loc-LD-800-only-css
translation-profile outgoing outgoingCID
preference 3
destination-pattern 9[2-9].........$
port 0/1/0
forward-digits 10
!
dial-peer voice 11 pots
corlist outgoing loc-LD-800-only-css
preference 3
destination-pattern 9[2-9]......$
port 0/1/0
forward-digits 7
!
dial-peer voice 12 pots
corlist outgoing loc-LD-800-only-css
preference 3
destination-pattern 911
port 0/1/0
forward-digits all
!
dial-peer voice 13 pots
corlist outgoing loc-LD-800-only-css
preference 3
destination-pattern 9911
port 0/1/0
forward-digits 3
!
dial-peer voice 14 pots
corlist outgoing loc-LD-800-only-css
translation-profile outgoing outgoingCID
preference 3
destination-pattern 91[2-9]..[2-9]......$
port 0/1/0
forward-digits 10
!
dial-peer voice 15 pots
corlist outgoing Unrestricted-css
translation-profile outgoing outgoingCID
preference 3
destination-pattern 9011T
port 0/1/0
prefix 011
!
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|