| Voll, Scott 2006-07-31, 1:11 pm |
| That is your problem... you need to go to the root of the AD if you are
going to use Multiple OU's.
Rerun the permissions wizard and change to the root.
Scott
-----Original Message-----
From: Ranjan Babu .G [mailto:ranjan.ganesh@gavsin.com]
Sent: Monday, July 31, 2006 8:54 AM
To: Ryan Ratliff
Cc: cisco-voip@puck.nether.net; Voll, Scott
Subject: RE: Need Help : CCM 3.3 / AD integration ERROR afterchange the
AD password
Hi Rayan,
Yes , user hasn't replicated to the DC CM .How resolve this.And How to
find out which account used to created to enable the callManager to
access the
directory
Can you not find any users or it only the new one that's not showing up?
[vbcol=seagreen]
Is the new user in the same AD OU as the ones that show up?[vbcol=seagreen]
-----Original Message-----
From: Ryan Ratliff [mailto:rratliff@cisco.com]
Sent: Monday, July 31, 2006 9:07 PM
To: Ranjan Babu .G
Cc: Voll, Scott; cisco-voip@puck.nether.net
Subject: Re: Need Help : CCM 3.3 / AD integration ERROR afterchange the
AD password
Can you not find any users or it only the new one that's not showing up?
Is the new user in the same AD OU as the ones that show up?
-Ryan
On Jul 31, 2006, at 11:29 AM, Ranjan Babu .G wrote:
Hi ,
Thanks Rayan ,Scott
Followed the steps To change the password. After these steps we
created a test user in AD and same has not reflected in CCM user list .
My command marked as >>
Regards,
Ranjan
Step 2 Enter the command, CCMPWDChanger[vbcol=seagreen]
Step 3 In the Administrator Password field, enter the password of the
user that was created to enable cisco CallManager to access the
directory.
[vbcol=seagreen]
account used to created to enable the callManager to access the
directory >>
[vbcol=seagreen]
using administrator account for admin CCM server .>>
Step 4 Click Next.
Step 5 From the User ID drop-down list box, choose the user CCMSysUser
[vbcol=seagreen]
Step 6 In the New Password field, enter the CCMSysUser password.
[vbcol=seagreen]
|