|
Home > Archive > Voice over IP Cisco > September 2006 > Less Route Patterns for Toll Free
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Less Route Patterns for Toll Free
|
|
| Carter, Bill 2006-09-27, 1:11 pm |
|
I am looking for a way in CallManager to reduce the 5 route patterns for
toll free. Right no I use:
9.1[800]XXXXXXX
9.1[855]XXXXXXX
9.1[866]XXXXXXX
9.1[877]XXXXXXX
9.1[888]XXXXXXX
Any suggestions?
This email may contain proprietary and confidential information for the sole use of the intended recipient.
Any review, retransmission, dissemination, or other use of this information by persons or entities other than
the intended recipient is prohibited. If you are not the intended recipient, please contact the sender and
delete all copies. To the extent that opinions are expressed in this message, they are not necessarily the
opinions of Sentinel Technologies or any of its affiliates, employees, directors, officers or shareholders.
| |
| Jason Burton 2006-09-27, 1:11 pm |
| You can use a route filter that looks for area codes 800,855,866,877,888 and then have a route pattern 8.@ that references that route filter
From: Carter, Bill
Sent: Wed 9/27/2006 1:31 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Less Route Patterns for Toll Free
I am looking for a way in CallManager to reduce the 5 route patterns for
toll free. Right no I use:
9.1[800]XXXXXXX
9.1[855]XXXXXXX
9.1[866]XXXXXXX
9.1[877]XXXXXXX
9.1[888]XXXXXXX
Any suggestions?
This email may contain proprietary and confidential information for the sole use of the intended recipient.
Any review, retransmission, dissemination, or other use of this informationby persons or entities other than
the intended recipient is prohibited. If you are not the intended recipient, please contact the sender and
delete all copies. To the extent that opinions are expressed in this message, they are not necessarily the
opinions of Sentinel Technologies or any of its affiliates, employees, directors, officers or shareholders.
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Lelio Fulgenzi 2006-09-27, 1:11 pm |
| I use 9.@ and a route filter. ;)
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"I can eat fifty eggs." "Nobody can eat fifty eggs."
----- Original Message -----
From: Carter, Bill
To: cisco-voip@puck.nether.net
Sent: Wednesday, September 27, 2006 1:31 PM
Subject: [cisco-voip] Less Route Patterns for Toll Free
I am looking for a way in CallManager to reduce the 5 route patterns for
toll free. Right no I use:
9.1[800]XXXXXXX
9.1[855]XXXXXXX
9.1[866]XXXXXXX
9.1[877]XXXXXXX
9.1[888]XXXXXXX
Any suggestions?
This email may contain proprietary and confidential information for the sole use of the intended recipient.
Any review, retransmission, dissemination, or other use of this information by persons or entities other than
the intended recipient is prohibited. If you are not the intended recipient, please contact the sender and
delete all copies. To the extent that opinions are expressed in this message, they are not necessarily the
opinions of Sentinel Technologies or any of its affiliates, employees, directors, officers or shareholders.
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Ortiz, Carlos 2006-09-28, 1:11 pm |
| We use 9.18[0678][0678]XXXXXXX. This allows a few patterns that are not
toll free but not much concern on our side as our LD access codes are
invoked from the carrier.
Carlos
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Carter, Bill
Sent: Wednesday, September 27, 2006 1:31 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Less Route Patterns for Toll Free
I am looking for a way in CallManager to reduce the 5 route patterns for
toll free. Right no I use:
9.1[800]XXXXXXX
9.1[855]XXXXXXX
9.1[866]XXXXXXX
9.1[877]XXXXXXX
9.1[888]XXXXXXX
Any suggestions?
This email may contain proprietary and confidential information for the
sole use of the intended recipient.
Any review, retransmission, dissemination, or other use of this
information by persons or entities other than
the intended recipient is prohibited. If you are not the intended
recipient, please contact the sender and
delete all copies. To the extent that opinions are expressed in this
message, they are not necessarily the
opinions of Sentinel Technologies or any of its affiliates, employees,
directors, officers or shareholders.
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Carter, Bill 2006-09-28, 1:11 pm |
| To the group....
This is what I am looking for. Is there a route pattern expression that
says 9.18[ any 2 occurrences of 0, any 2 occurrences of 5, any 2
occurrences of 6...etc.
I don't want to use 9.@ with route filters. cisco documentation has
sufficently scared me away from 9.@.
-----Original Message-----
From: Ortiz, Carlos [mailto:CORTIZ@broward.org]
Sent: Thursday, September 28, 2006 8:35 AM
To: Carter, Bill; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] Less Route Patterns for Toll Free
We use 9.18[0678][0678]XXXXXXX. This allows a few patterns that are not
toll free but not much concern on our side as our LD access codes are
invoked from the carrier.
Carlos
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Carter, Bill
Sent: Wednesday, September 27, 2006 1:31 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Less Route Patterns for Toll Free
I am looking for a way in CallManager to reduce the 5 route patterns for
toll free. Right no I use:
9.1[800]XXXXXXX
9.1[855]XXXXXXX
9.1[866]XXXXXXX
9.1[877]XXXXXXX
9.1[888]XXXXXXX
Any suggestions?
This email may contain proprietary and confidential information for the
sole use of the intended recipient.
Any review, retransmission, dissemination, or other use of this
information by persons or entities other than the intended recipient is
prohibited. If you are not the intended recipient, please contact the
sender and delete all copies. To the extent that opinions are expressed
in this message, they are not necessarily the opinions of Sentinel
Technologies or any of its affiliates, employees, directors, officers or
shareholders.
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
This email may contain proprietary and confidential information for the sole use of the intended recipient.
Any review, retransmission, dissemination, or other use of this information by persons or entities other than
the intended recipient is prohibited. If you are not the intended recipient, please contact the sender and
delete all copies. To the extent that opinions are expressed in this message, they are not necessarily the
opinions of Sentinel Technologies or any of its affiliates, employees, directors, officers or shareholders.
| |
| Ryan Ratliff 2006-09-28, 1:11 pm |
| The only way I can think of to do this is with the @ symbol and a
route filter. If you really really hate the NANP and don't want to
use @ you can always rewrite your NANP file. Be aware that it may be
overwritten any time you upgrade CM though.
I will say that creating a route filter that matches only those area
codes is not very painful. You can always test with a separate
partition only your test phone can access if you really want to put
it through the paces and not risk affecting everyone else.
-Ryan
On Sep 28, 2006, at 1:24 PM, Carter, Bill wrote:
To the group....
This is what I am looking for. Is there a route pattern expression that
says 9.18[ any 2 occurrences of 0, any 2 occurrences of 5, any 2
occurrences of 6...etc.
I don't want to use 9.@ with route filters. cisco documentation has
sufficently scared me away from 9.@.
-----Original Message-----
From: Ortiz, Carlos [mailto:CORTIZ@broward.org]
Sent: Thursday, September 28, 2006 8:35 AM
To: Carter, Bill; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] Less Route Patterns for Toll Free
We use 9.18[0678][0678]XXXXXXX. This allows a few patterns that are not
toll free but not much concern on our side as our LD access codes are
invoked from the carrier.
Carlos
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Carter, Bill
Sent: Wednesday, September 27, 2006 1:31 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Less Route Patterns for Toll Free
I am looking for a way in CallManager to reduce the 5 route patterns for
toll free. Right no I use:
9.1[800]XXXXXXX
9.1[855]XXXXXXX
9.1[866]XXXXXXX
9.1[877]XXXXXXX
9.1[888]XXXXXXX
Any suggestions?
This email may contain proprietary and confidential information for the
sole use of the intended recipient.
Any review, retransmission, dissemination, or other use of this
information by persons or entities other than the intended recipient is
prohibited. If you are not the intended recipient, please contact the
sender and delete all copies. To the extent that opinions are expressed
in this message, they are not necessarily the opinions of Sentinel
Technologies or any of its affiliates, employees, directors, officers or
shareholders.
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
This email may contain proprietary and confidential information for
the sole use of the intended recipient.
Any review, retransmission, dissemination, or other use of this
information by persons or entities other than
the intended recipient is prohibited. If you are not the intended
recipient, please contact the sender and
delete all copies. To the extent that opinions are expressed in this
message, they are not necessarily the
opinions of Sentinel Technologies or any of its affiliates,
employees, directors, officers or shareholders.
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|