|
Home > Archive > Voice over IP Cisco > September 2006 > MOH input CCME
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| Bill Riley III 2006-09-28, 1:11 pm |
|
I have a customer that is using Call manager express. They have recently
purchased a live MOH system to play a Musak stream. The device is made
by premier technologies. The only output is an RCA connection currently
but they have a RCA to RJ-11 adaptor. I am trying to find out exactly
what I need to connect the RJ-11 port from this MOH system into on my
CCME system. I asked the vendor if it was an analog connection and if my
device needed to provide dial tone. Their response was that it was a
5-ohm output with an amplifier and I needed to plug it into my phone
systems MOH input. So rather than going back and fourth with them I
decided to see if anyone has any experience with these type of devices
and what you would suggest. Thanks for your help.
NOTICE: This electronic mail message and any files transmitted with it are intended exclusively
for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged
information. Any unauthorized review, use, printing, saving, copying, disclosure
or distribution is strictly prohibited. If you have received this message in error, please immediately
advise the sender by reply email and delete all copies.
| |
| Ryan Ratliff 2006-09-28, 1:11 pm |
| This doc is for CME 3.3.
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/
products_configuration_guide_chapter0918
6a00804ad866.html#wp2175068
-Ryan
On Sep 28, 2006, at 9:39 AM, Bill Riley III wrote:
I have a customer that is using Call manager express. They have
recently purchased a live MOH system to play a Musak stream. The
device is made by premier technologies. The only output is an RCA
connection currently but they have a RCA to RJ-11 adaptor. I am
trying to find out exactly what I need to connect the RJ-11 port from
this MOH system into on my CCME system. I asked the vendor if it was
an analog connection and if my device needed to provide dial tone.
Their response was that it was a 5-ohm output with an amplifier and I
needed to plug it into my phone systems MOH input. So rather than
going back and fourth with them I decided to see if anyone has any
experience with these type of devices and what you would suggest.
Thanks for your help.
NOTICE: This electronic mail message and any files transmitted with
it are intended exclusively for the individual or entity to which it
is addressed. The message, together with any attachment, may contain
confidential and/or privileged information. Any unauthorized review,
use, printing, saving, copying, disclosure or distribution is
strictly prohibited. If you have received this message in error,
please immediately advise the sender by reply email and delete all
copies.
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
|
|
|
|
|