|
Home > Archive > Voice over IP Cisco > January 2007 > CME vs CM
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| Voll, Scott 2007-01-25, 7:12 pm |
| I know it's been asked but I can't find it.
What's the difference between CME and CM?
Thanks
Scott
| |
| Hinson, Greg 2007-01-25, 7:12 pm |
| CME runs on IOS and has a different web interface. Phones register to
the router in a way similar to the way they would in SRST, with
ephone-dns and ephone assignments. Its basically an SRST router on
steroids.
-Greg
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Voll, Scott
Sent: Thursday, January 25, 2007 1:01 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] CME vs CM
I know it's been asked but I can't find it.
What's the difference between CME and CM?
Thanks
Scott
This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
| |
| Voll, Scott 2007-01-25, 7:12 pm |
| OK.... To make it a little more direct.
I know it runs on the Router like SRST and I know it's for smaller
installs. I have only dealt with CM but I have a site that would like a
50 phone install and was wondering what I lost with CME over CM.
Scott
________________________________
From: Hinson, Greg [mailto:Greg_Hinson@adp.com]
Sent: Thursday, January 25, 2007 1:08 PM
To: Voll, Scott; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] CME vs CM
CME runs on IOS and has a different web interface. Phones register to
the router in a way similar to the way they would in SRST, with
ephone-dns and ephone assignments. Its basically an SRST router on
steroids.
-Greg
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Voll, Scott
Sent: Thursday, January 25, 2007 1:01 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] CME vs CM
I know it's been asked but I can't find it.
What's the difference between CME and CM?
Thanks
Scott
________________________________
This message and any attachments are intended only for the use of the
addressee and may contain information that is privileged and
confidential. If the reader of the message is not the intended recipient
or an authorized representative of the intended recipient, you are
hereby notified that any dissemination of this communication is strictly
prohibited. If you have received this communication in error, please
notify us immediately by e-mail and delete the message and any
attachments from your system.
| |
| Lelio Fulgenzi 2007-01-25, 7:12 pm |
| Scott, don't think of CME as a subset of CM it is, in fact, a different product who's features' intersect with CM. If you want to know what features you have, you can read the docs here . If the chance is high you can bring them into your centralized deployment, you run the risk of removing features if you have deployed them on CME. I know that wouldn't fly well over here so we waited until a central deployment with SRST was possible.
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
I'm changing my name to iPhone. Who do I pay trademark rights to?
----- Original Message -----
From: Voll, Scott
To: Hinson, Greg ; cisco-voip@puck.nether.net
Sent: Thursday, January 25, 2007 4:13 PM
Subject: Re: [cisco-voip] CME vs CM
OK.. To make it a little more direct.
I know it runs on the Router like SRST and I know it's for smaller installs. I have only dealt with CM but I have a site that would like a 50 phone install and was wondering what I lost with CME over CM.
Scott
------------------------------------------------------------------------------
From: Hinson, Greg [mailto:Greg_Hinson@adp.com]
Sent: Thursday, January 25, 2007 1:08 PM
To: Voll, Scott; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] CME vs CM
CME runs on IOS and has a different web interface. Phones register to the router in a way similar to the way they would in SRST, with ephone-dns and ephone assignments. Its basically an SRST router on steroids.
-Greg
------------------------------------------------------------------------------
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Voll, Scott
Sent: Thursday, January 25, 2007 1:01 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] CME vs CM
I know it's been asked but I can't find it.
What's the difference between CME and CM?
Thanks
Scott
------------------------------------------------------------------------------
This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
------------------------------------------------------------------------------
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Paul Choi 2007-01-25, 7:12 pm |
|
--- "Voll, Scott" <Scott.Voll@wesd.org> wrote:
> OK.... To make it a little more direct.
You lose flexibility, some ease of management, and the
ability to support more than 240 phones.
CCME does *not* support MGCP like CCM - only SIP and
H.323. CCME, AFAIK, does not support background image
displays on 41/61 phones. CCME also has a limit on
the number of ring tones you can make simutaneously
available. CCME does not support barge, cBarge,
attendant console, and many other available features
of CCM. There are also no calling search spaces or
partitions although there is 'class of restrictions'
in place of those.
If you really want to see *ALL* the differences, I
highly suggest you pick up the IPTX book and the CCM
books and compare features.
Paul
________________________________________
________________________________________
____
TV dinner still cooling?
Check out "Tonight's Picks" on Yahoo! TV.
http://tv.yahoo.com/
| |
| Lawrence E. Bakst 2007-01-30, 7:11 am |
| Thought I throw in a plug for CME.
CME runs on a router that runs IOS, typically these days that's an ISR router. These routers are inexpensive and have lots of connectivity options with a large choice of WIC, VIC, NM, and other card form factors. CME has a companion product called Unity E
xpress which gets you voice mail either on flash (AIM-CUE) or on a hard disk (NM-CUE). You can use the same 79xx phones as CM and if necessary you could also use regular analog phones. The phone system is a large number of features, but not a large as CM,
however there are a few features that CME has that CM doesn't. You get analog, SIP, and H.323 connectivity. CME has a pretty nice basic automated attendant system and call distribution capabilities.
If you have a small 10-150 phone office you can make a nice ISR system that has data, voice, and voice-mail all on a single router, at a very low cost. For example at 2821 or 2851 ISR with AIM-CUE for smaller sites or a 3825/3845 with NM-CUE for larger si
tes.
I think CME is under appreciated. cisco doesn't seem to push it.
Best,
leb
At 1:00 PM -0800 1/25/07, Voll, Scott wrote:
>Content-class: urn:content-classes:message
>Content-Type: multipart/alternative;
> boundary="----_=_NextPart_001_01C740C3.DD5082AB"
>
>I know it's been asked but I can't find it.
>
>What's the difference between CME and CM?
>
>Thanks
>
>Scott
>
> ________________________________________
_______
>cisco-voip mailing list
>cisco-voip@puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|