Voice over IP Cisco - Configuring E1 in Switzerland

This is Interesting: Free IT Magazines  
Home > Archive > Voice over IP Cisco > January 2007 > Configuring E1 in Switzerland





You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

Author Configuring E1 in Switzerland
Nesen Kisten \(ZA\)

2007-01-31, 7:11 am

Hi All,



Is there any difference with configuration of E1 in Switzerland as
opposed to the UK ?



Regards



Nesen


This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer.htm"

Patrick Diener

2007-01-31, 7:11 am

don't know what's used in the UK but in Switzerland we use

framing: CRC4
linecode: HDB3
(should be the default on E1 VICs)
isdn switch-type primary-net5


On 1/31/07, Nesen Kisten (ZA) <Nesen.Kisten@za.didata.com> wrote:
>
>
>
>
> Hi All,
>
>
>
> Is there any difference with configuration of E1 in Switzerland as opposed
> to the UK ?
>
>
>
> Regards
>
>
>
> Nesen
>
> This email and all contents are subject to the following disclaimer:
>
> "http://www.dimensiondata.com/emaildisclaimer.htm"
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>

Erik Erasmus \(E\)

2007-01-31, 7:11 am


UK should be the same but can depend on the switches the telco use.
More than one telco



-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Patrick
Diener
Sent: Wednesday, January 31, 2007 12:06 PM
To: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Configuring E1 in Switzerland

don't know what's used in the UK but in Switzerland we use

framing: CRC4
linecode: HDB3
(should be the default on E1 VICs)
isdn switch-type primary-net5


On 1/31/07, Nesen Kisten (ZA) <Nesen.Kisten@za.didata.com> wrote:
>
>
>
>
> Hi All,
>
>
>
> Is there any difference with configuration of E1 in Switzerland as

opposed
> to the UK ?
>
>
>
> Regards
>
>
>
> Nesen
>
> This email and all contents are subject to the following disclaimer:
>
> "http://www.dimensiondata.com/emaildisclaimer.htm"
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>

________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~
This e-mail and its contents are subject to the Telkom SA Limited
e-mail legal notice available at
http://www.telkom.co.za/TelkomEMailLegalNotice.PDF
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~
George Scott

2007-01-31, 1:11 pm


This depends on the electrical interface provided by the telco. The new
circuits are coming in with G.703 signaling. This means the framing will be
UNFRAMED.

Your config would look like

Controller E1 0/0/0
Channel-group 0 unframed
Vice the default CRC4

Geo


-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of
cisco-voip-request@puck.nether.net
Sent: Wednesday, January 31, 2007 4:41 AM
To: cisco-voip@puck.nether.net
Subject: cisco-voip Digest, Vol 47, Issue 183



Message: 4
Date: Wed, 31 Jan 2007 11:06:01 +0100
From: "Patrick Diener" <patrick.diener@gmail.com>
Subject: Re: [cisco-voip] Configuring E1 in Switzerland
To: cisco-voip@puck.nether.net
Message-ID:
< c0deb5b80701310206p2274016du71b4aa485f3d
45b8@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

don't know what's used in the UK but in Switzerland we use

framing: CRC4
linecode: HDB3
(should be the default on E1 VICs)
isdn switch-type primary-net5


On 1/31/07, Nesen Kisten (ZA) <Nesen.Kisten@za.didata.com> wrote:
>
>
>
>
> Hi All,
>
>
>
> Is there any difference with configuration of E1 in Switzerland as opposed
> to the UK ?
>
>
>
> Regards
>
>
>
> Nesen
>
> This email and all contents are subject to the following disclaimer:
>
> "http://www.dimensiondata.com/emaildisclaimer.htm"
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>

Sponsored Links






Free braindumps | Software forum | Database administration forum

Copyright 2003 - 2008 webservertalk.com