|
Home > Archive > Voice over IP Cisco > January 2007 > voice gateway - trace a call
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
voice gateway - trace a call
|
|
| kevin k 2007-01-31, 1:11 pm |
| i am fairly new on voip. but reading to get better.
i have user complaining that they get busy signal but only a few (less thatn
10) are on the phone. they have a pri line. so this is what i did to
trouble shoot.
i associate myself to their partition and css.
the gateway is in the same same partition.
i make a call and execute "show voice port summary"
is there any way i can see which line i am using? even debug but i want to
stay away from debug.
thanks
| |
| Voll, Scott 2007-01-31, 1:11 pm |
| Debug isdn q931 will give you a lot of information for this kind of
problem.
Scott
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of kevin k
Sent: Wednesday, January 31, 2007 6:30 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] voice gateway - trace a call
i am fairly new on voip. but reading to get better.
i have user complaining that they get busy signal but only a few (less
thatn 10) are on the phone. they have a pri line. so this is what i
did to trouble shoot.
i associate myself to their partition and css.
the gateway is in the same same partition.
i make a call and execute "show voice port summary"
is there any way i can see which line i am using? even debug but i want
to stay away from debug.
thanks
| |
| kevin k 2007-01-31, 1:11 pm |
| i am seeing only "debug" so far. so is there any regular and safe "show"
command? it would be very cool if so.
On 1/31/07, Voll, Scott <Scott.Voll@wesd.org> wrote:
>
> Debug isdn q931 will give you a lot of information for this kind of
> problem.
>
>
>
> Scott
>
>
> ------------------------------
>
> *From:* cisco-voip-bounces@puck.nether.net [mailto:
> cisco-voip-bounces@puck.nether.net] *On Behalf Of *kevin k
> *Sent:* Wednesday, January 31, 2007 6:30 AM
> *To:* cisco-voip@puck.nether.net
> *Subject:* [cisco-voip] voice gateway - trace a call
>
>
>
> i am fairly new on voip. but reading to get better.
>
>
>
> i have user complaining that they get busy signal but only a few (less
> thatn 10) are on the phone. they have a pri line. so this is what i did to
> trouble shoot.
>
>
>
> i associate myself to their partition and css.
>
> the gateway is in the same same partition.
>
> i make a call and execute "show voice port summary"
>
>
>
> is there any way i can see which line i am using? even debug but i want
> to stay away from debug.
>
>
>
>
>
> thanks
>
| |
| Ryan Ratliff 2007-01-31, 1:11 pm |
| The 'debug isdn q931' is a very low-impact debug. You can safely
run it without fear of rebooting your router 
-Ryan
On Jan 31, 2007, at 11:34 AM, kevin k wrote:
i am seeing only "debug" so far. so is there any regular and safe
"show" command? it would be very cool if so.
On 1/31/07, Voll, Scott <Scott.Voll@wesd.org> wrote:
Debug isdn q931 will give you a lot of information for this kind of
problem.
Scott
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-
bounces@puck.nether.net] On Behalf Of kevin k
Sent: Wednesday, January 31, 2007 6:30 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] voice gateway - trace a call
i am fairly new on voip. but reading to get better.
i have user complaining that they get busy signal but only a few
(less thatn 10) are on the phone. they have a pri line. so this is
what i did to trouble shoot.
i associate myself to their partition and css.
the gateway is in the same same partition.
i make a call and execute "show voice port summary"
is there any way i can see which line i am using? even debug but i
want to stay away from debug.
thanks
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|