| Alessandro Bertacco 2007-10-02, 7:12 am |
| Hi Wes,
So you think it will be an hardware misconfiguration problem?
Ok, i'll try with a server that match exatly the supported config.
Thank you very much
Alessandro
________________________________
Da: Wes Sisk [mailto:wsisk@cisco.com]
Inviato: luned́ 1 ottobre 2007 23.21
A: Alessandro Bertacco
Cc: cisco-voip@puck.nether.net
Oggetto: Re: [cisco-voip] CUCM 6.0.(1) Installation Problem
verify your hardware matches the specified hardware buildout exactly.
http://www.cisco.com/en/US/products...chure_list.html
/Wes
Alessandro Bertacco wrote:
Hi every one.
Have you ever had a problem during the CUCM 6.0.(1) DVD installation? The problem is that.
After the server DL 320 G2 boot up from the DVD drive of the CUCM 6.0.(1) System Disk, the system ask me to configure all requested parameter, Ip address, NTP, ecc...the installation should begin, but, Xserver windows appear and I see a Red Hat Enterprise installation ask me the partition configuration of the HardDrive, after that the installation show me a unrecoverable error and stop.
Any idea???
Thank you very much
Alessandro Bertacco
Network Engineer
alessandro.bertacco@lanservice.it <mailto:alessandro.bertacco@lanservice.it>
________________________________
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|