|
Home > Archive > Voice over IP Cisco > October 2007 > Access Valcom Paging from FXO port
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Access Valcom Paging from FXO port
|
|
| Countryman, Edward 2007-10-09, 7:12 pm |
|
Second request on this to the group
When I dial the DAC for the paging port it waits a moment then fast
busy.
Has anyone done this with a valcom from a cisco FXO port?
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Countryman,
Edward
Sent: Tuesday, October 09, 2007 11:40 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Help with Paging interface
I've installed an FXO port in my router and believe I have it configured
correctly in CCM but cannot get it to open when connected to a VALCOM
V2000A.
When dialing the route pattern for this port; it appears to sit for
several seconds then go fast busy. It is almost like it is waiting for
something from the valcom (dial tone detect?)
I presently have the battery feed switch on the valcom set to ON.
Any ideas?
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Steve G 2007-10-10, 1:12 am |
| Are you using h323 or MGCP to control the fxo port?
Do you see the green light on your FXO port flash when you dial the DN? If
you see it flash, then you probably don't have it connected to the Valcom
correctly. Please paste your router config for the voice port and
dial-peer.
On 10/9/07, Countryman, Edward <Edward.Countryman@provena.org> wrote:
>
>
> Second request on this to the group
>
> When I dial the DAC for the paging port it waits a moment then fast
> busy.
>
> Has anyone done this with a valcom from a cisco FXO port?
>
>
> -----Original Message-----
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Countryman,
> Edward
> Sent: Tuesday, October 09, 2007 11:40 AM
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] Help with Paging interface
>
>
> I've installed an FXO port in my router and believe I have it configured
> correctly in CCM but cannot get it to open when connected to a VALCOM
> V2000A.
>
> When dialing the route pattern for this port; it appears to sit for
> several seconds then go fast busy. It is almost like it is waiting for
> something from the valcom (dial tone detect?)
>
> I presently have the battery feed switch on the valcom set to ON.
>
> Any ideas?
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
|
|
|
|
|