|
Home > Archive > Voice over IP Cisco > October 2007 > Blackbox JPMT152A with VG224
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Blackbox JPMT152A with VG224
|
|
| Jason Aarons \(US\) 2007-10-10, 7:11 pm |
| I must have the wrong part number from Blackbox, I'm trying to connect a
VG224 to a 24-port (25-Pair Telco Amphenol) patch panel without punching
anything down, just plug and play.
The partnumber I bought was the JPMT152A which has 4 25-Pair Telco
connections, why the 3 extra Amphenol connectors on this part?
Anyone know a correct part number/vendor for a 25-Pair Amphenol 24-Port
Patch Panel from Blackbox? I'm hoping someone can suggest something they
used to avoid mis-ordering again.
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
| |
| Ted Nugent 2007-10-10, 7:11 pm |
| I just went through this a few weeks ago. They don't have anything in thier
catalog thats rack mountable but they do have a custom PN of CBCC303808
(Telco patch panel, 24 portx2 wire(RJ11) to 50pin female Telco). Took about
3 weeks to get them and don't quote me on this but I think they cost about
$80 each.
I've made my own in the past but I'm no wiz with a punch tool so this time I
just had them ordered...
On 10/10/07, Jason Aarons (US) <jason.aarons@us.didata.com> wrote:
>
> I must have the wrong part number from Blackbox, I'm trying to connect a
> VG224 to a 24-port (25-Pair Telco Amphenol) patch panel without punching
> anything down, just plug and play.
>
>
>
> The part number I bought was the JPMT152A which has 4 25-Pair Telco
> connections, why the 3 extra Amphenol connectors on this part?
>
>
>
> Anyone know a correct part number/vendor for a 25-Pair Amphenol 24-Port
> Patch Panel from Blackbox? I'm hoping someone can suggest something they
> used to avoid mis-ordering again.
>
>
>
> ------------------------------
>
> *Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
| |
|
|
|
|
|