|
Home > Archive > Voice over IP Cisco > October 2007 > dial-peer circulation iusse
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
dial-peer circulation iusse
|
|
| David Lin 2007-10-12, 1:12 am |
|
Hi all,
In order to conver the SIP call to H323 and G.711 to G.729/723, it means SIP call-->Port 3/1-->port 3/2-->another H323 gateway. I set cross-connectionon two T1 interfaces on one cisco gateway and the dial-peer are as following,
dial-peer voice 100 voip incoming called-number 999T session protocol sipv2!dial-peer voice 200 pots destination-pattern 200T port 3/1:D prefix 999!dial-peer voice 300 pots incoming called-number 999T direct-inward-dial!dial-peer voice 400 voip destination-pattern 999T session target ipv4:10.10.30.40
Somehow the gateway keeps trying the dial-peer before sending out the H323 Call to the far end gateway, but some time not. It looks like the call willexhaust the channel resource. What's wrong in the configuration? Can anyone advise? Thank you.
CallID CID ccVdb Port DSP/Ch Called # Codec Dial-peers0xA09 1D4F 0x64A5B6D0 3/1:D.0 3006/3 *5195226699 g711alaw 100/2000xA0A 1D50 0x64B7ADF0 3/2:D.0 No dsp 5195226699 None 300/2000xA0B 1D50 0x64A5B6D0 3/1:D.1 No dsp *5195226699 None 200/3000xA0C 1D53 0x64B7ADF0 3/2:D.1 No dsp 5195226699 None 300/2000xA0D 1D53 0x64A5B6D0 3/1:D.2 No dsp *5195226699 None 200/3000xA0E1D56 0x64B7ADF0 3/2:D.2 No dsp 5195226699 None 300/2000xA0F 1D56 0x64A5B6D0 3/1:D.3 No dsp *5195226699 None 200/3000xA10 1D59 0x64B7ADF0 3/2:D.3 3008/2 5195226699 g729r8 300/400
0xA2B 1D7A 0x64A5B6D0 3/1:D.4 3009/5 *4163955400 g711ulaw 100/2000xA2C 1D7B 0x64B7ADF0 3/2:D.4 3008/4 4163955400 g729r8 300/4007 active calls found
________________________________________
_________________________
Are you ready for Windows Live Messenger Beta 8.5 ? Get the latest for freetoday!
http://entertainment.sympatico.msn....wsLiveMessenger
| |
| David Lin 2007-10-12, 1:12 am |
|
Sry, correction:
dial-peer voice 200 pots destination-pattern 999T <<<---Not 200T port 3/1:D prefix 999
From: david.lin@msn.comTo: cisco-voip@puck.nether.netDate: Thu, 11 Oct 200721:47:40 -0400Subject: [cisco-voip] dial-peer circulation iusse
Hi all, In order to conver the SIP call to H323 and G.711 to G.729/723, it means SIP call-->Port 3/1-->port 3/2-->another H323 gateway. I set cross-connection on two T1 interfaces on one cisco gateway and the dial-peer are asfollowing, dial-peer voice 100 voip incoming called-number 999T session protocol sipv2!dial-peer voice 200 pots destination-pattern 200T port 3/1:D prefix 999!dial-peer voice 300 pots incoming called-number 999T direct-inward-dial!dial-peer voice 400 voip destination-pattern 999T session target ipv4:10.10.30.40 Somehow the gateway keeps trying the dial-peer before sendingout the H323 Call to the far end gateway, but some time not. It looks likethe call will exhaust the channel resource. What's wrong in the configuration? Can anyone advise? Thank you. CallID CID ccVdb Port DSP/Ch Called # Codec Dial-peers0xA09 1D4F 0x64A5B6D0 3/1:D.0 3006/3 *5195226699 g711alaw 100/2000xA0A 1D50 0x64B7ADF0 3/2:D.0 No dsp 5195226699 None 300/2000xA0B 1D50 0x64A5B6D0 3/1:D.1 No dsp *5195226699 None 200/3000xA0C 1D53 0x64B7ADF0 3/2:D.1 Nodsp 5195226699 None 300/2000xA0D 1D53 0x64A5B6D0 3/1:D.2 No dsp *5195226699 None 200/3000xA0E 1D56 0x64B7ADF0 3/2:D.2 No dsp 5195226699 None 300/2000xA0F 1D56 0x64A5B6D0 3/1:D.3 No dsp *5195226699 None 200/3000xA10 1D59 0x64B7ADF0 3/2:D.3 3008/2 5195226699 g729r8 300/400 0xA2B 1D7A 0x64A5B6D0 3/1:D.4 3009/5 *4163955400 g711ulaw 100/2000xA2C 1D7B 0x64B7ADF0 3/2:D.4 3008/4 4163955400 g729r8 300/4007 active calls found
Are you ready for Windows Live Messenger Beta 8.5 ? Get the latest for freetoday!
________________________________________
_________________________
R U Ready for Windows Live Messenger Beta 8.5? Try it today!
http://entertainment.sympatico.msn....wsLiveMessenger
| |
| Paul Choi 2007-10-12, 1:12 am |
| Use preference statements to make sure that your pots
dial-peer is first in line.
Paul
--- David Lin <david.lin@msn.com> wrote:
>
> Sry, correction:
> dial-peer voice 200 pots destination-pattern 999T
> <<<---Not 200T port 3/1:D prefix 999
>
>
> From: david.lin@msn.comTo:
> cisco-voip@puck.nether.netDate: Thu, 11 Oct 2007
> 21:47:40 -0400Subject: [cisco-voip] dial-peer
> circulation iusse
>
>
> Hi all, In order to conver the SIP call to H323 and
> G.711 to G.729/723, it means SIP call-->Port
> 3/1-->port 3/2-->another H323 gateway. I set
> cross-connection on two T1 interfaces on one Cisco
> gateway and the dial-peer are as following,
> dial-peer voice 100 voip incoming called-number 999T
> session protocol sipv2!dial-peer voice 200 pots
> destination-pattern 200T port 3/1:D prefix
> 999!dial-peer voice 300 pots incoming called-number
> 999T direct-inward-dial!dial-peer voice 400 voip
> destination-pattern 999T session target
> ipv4:10.10.30.40 Somehow the gateway keeps trying
> the dial-peer before sending out the H323 Call to
> the far end gateway, but some time not. It looks
> like the call will exhaust the channel resource.
> What's wrong in the configuration? Can anyone
> advise? Thank you. CallID CID ccVdb
> Port DSP/Ch Called # Codec
> Dial-peers0xA09 1D4F 0x64A5B6D0 3/1:D.0
> 3006/3 *5195226699 g711alaw 100/2000xA0A 1D50
> 0x64B7ADF0 3/2:D.0 No dsp 5195226699 None
> 300/2000xA0B 1D50 0x64A5B6D0 3/1:D.1 No dsp
> *5195226699 None 200/3000xA0C 1D53
> 0x64B7ADF0 3/2:D.1 No dsp 5195226699 None
> 300/2000xA0D 1D53 0x64A5B6D0 3/1:D.2 No dsp
> *5195226699 None 200/3000xA0E 1D56
> 0x64B7ADF0 3/2:D.2 No dsp 5195226699 None
> 300/2000xA0F 1D56 0x64A5B6D0 3/1:D.3 No dsp
> *5195226699 None 200/3000xA10 1D59
> 0x64B7ADF0 3/2:D.3 3008/2 5195226699 g729r8
> 300/400 0xA2B 1D7A 0x64A5B6D0 3/1:D.4 3009/5
> *4163955400 g711ulaw 100/2000xA2C 1D7B
> 0x64B7ADF0 3/2:D.4 3008/4 4163955400 g729r8
> 300/4007 active calls found
>
> Are you ready for Windows Live Messenger Beta 8.5 ?
> Get the latest for free today!
>
________________________________________
_________________________
> R U Ready for Windows Live Messenger Beta 8.5? Try
> it today!
>
http://entertainment.sympatico.msn....wsLiveMessenger>
________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
________________________________________
________________________________________
____
Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?link=list&sid=396545469
| |
| David Lin 2007-10-12, 1:12 am |
|
I have only one dial-peer to pot, only one T1 for terminiating the calls.SoI don't think it's the preference problem.
David
> Date: Thu, 11 Oct 2007 19:37:41 -0700> From: asobihoudai@yahoo.com> Subject: Re: [cisco-voip] dial-peer circulation iusse> To: david.lin@msn.com; cisco-voip@puck.nether.net> > Use preference statements to make sure that your pots> dial-peer is first in line.> > Paul
________________________________________
_________________________
Have fun while connecting on Messenger! Click here to learn more.
http://entertainment.sympatico.msn....wsLiveMessenger
|
|
|
|
|