|
Home > Archive > Voice over IP Cisco > October 2007 > Upgrade to V6.0 hanging
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Upgrade to V6.0 hanging
|
|
| Daniel Martin 2007-10-30, 7:11 pm |
| Hi,
I'm having a problem upgrading my prod publisher from v5.1.1 to
v6.0(1a). I was able to do it without any problems on my lab cluster.
I'm using the V5.x to V6.0(1a) Upgrade DVD which I used to do the lab.
When I start the upgrade, it downloads from DVD and after a while it
just hangs. Sometimes it's a 1000Mb, 800MB and even around 650MB.
I can see the CPU hit 100% and stay there. That's when it hangs.
The server is a 7825H1 with 2GB of RAM, 72GB hard drive and a 3.04GHz
CPU which meets the hardware requirement.
Anybody have this problem before?
Thanks,
Daniel.
Daniel Martin
Groupe Reseau / Networks Group
CAE Inc.
St-Laurent, Quebec Canada
H4T 1G6
Tel: 1-514-341-2000 x4878
Fax: 1-514-340-5583
| |
|
|
| Daniel Martin 2007-10-30, 7:11 pm |
| RTMT reports that RisDC is causing Core Dumps each time I try the
upgrade.
TAC had told me to upgrade to fix the core dump issue but the upgrade is
causing dumps also. I seem to be going in circles here.
I'll have to go back to TAC I guess.
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Daniel Martin
Sent: Tuesday, October 30, 2007 6:18 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Upgrade to V6.0 hanging
Hi,
I'm having a problem upgrading my prod publisher from v5.1.1 to
v6.0(1a). I was able to do it without any problems on my lab cluster.
I'm using the V5.x to V6.0(1a) Upgrade DVD which I used to do the lab.
When I start the upgrade, it downloads from DVD and after a while it
just hangs. Sometimes it's a 1000Mb, 800MB and even around 650MB.
I can see the CPU hit 100% and stay there. That's when it hangs.
The server is a 7825H1 with 2GB of RAM, 72GB hard drive and a 3.04GHz
CPU which meets the hardware requirement.
Anybody have this problem before?
Thanks,
Daniel.
Daniel Martin
Groupe Reseau / Networks Group
CAE Inc.
St-Laurent, Quebec Canada
H4T 1G6
Tel: 1-514-341-2000 x4878
Fax: 1-514-340-5583
| |
| Daniel Martin 2007-10-31, 1:11 am |
| I guess it was.
FTP worked like a charm. Thanks Wes.
From: Wes Sisk [mailto:wsisk@cisco.com]
Sent: Tuesday, October 30, 2007 6:24 PM
To: Daniel Martin
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Upgrade to V6.0 hanging
Can you the upgrade file on SFTP server rather than disk? This sounds
like disk read problems. /wes
Daniel Martin wrote:
Hi,
I'm having a problem upgrading my prod publisher from v5.1.1 to
v6.0(1a). I was able to do it without any problems on my lab cluster.
I'm using the V5.x to V6.0(1a) Upgrade DVD which I used to do the lab.
When I start the upgrade, it downloads from DVD and after a while it
just hangs. Sometimes it's a 1000Mb, 800MB and even around 650MB.
I can see the CPU hit 100% and stay there. That's when it hangs.
The server is a 7825H1 with 2GB of RAM, 72GB hard drive and a 3.04GHz
CPU which meets the hardware requirement.
Anybody have this problem before?
Thanks,
Daniel.
Daniel Martin
Groupe Reseau / Networks Group
CAE Inc.
St-Laurent, Quebec Canada
H4T 1G6
Tel: 1-514-341-2000 x4878
Fax: 1-514-340-5583
________________________________
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|