|
Home > Archive > Voice over IP Cisco > November 2007 > CUPC and Outlook Dialing
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
CUPC and Outlook Dialing
|
|
| Christopher M. Bomba 2007-11-03, 7:11 pm |
| Does anyone know if you can or where you could prefix digits when using
Personal Communicator and dialing out of Outlook? I looked and couldn't
find anything. Not sure if this can even be done. I know you can do it
with fast dials but I don't want to have people create contacts with a 91
prefixed on every number.
Thanks,
Chris
| |
| Jason Aarons \(US\) 2007-11-03, 7:11 pm |
| Control Panel, Phone and Modem options for dialing out of Outlook.
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Christopher M.
Bomba
Sent: Saturday, November 03, 2007 2:46 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] CUPC and Outlook Dialing
Does anyone know if you can or where you could prefixdigits when using
Personal Communicator and dialing out of Outlook? I looked and couldn't
find anything. Not sure if this can even be done. I know you can do
it with fast dials but I don't want to havepeople create contacts with
a 91 prefixed on every number.
Thanks,
Chris
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
| |
| Nick Kassel 2007-11-05, 7:12 am |
| I was lead to believe that you need to set up Application Dial Rules
within CCM to do this.
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jason Aarons
(US)
Sent: 03 November 2007 19:52
To: Christopher M. Bomba; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CUPC and Outlook Dialing
Control Panel, Phone and Modem options for dialing out of Outlook.
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Christopher M.
Bomba
Sent: Saturday, November 03, 2007 2:46 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] CUPC and Outlook Dialing
Does anyone know if you can or where you could prefix digits when using
Personal Communicator and dialing out of Outlook? I looked and couldn't
find anything. Not sure if this can even be done. I know you can do
it with fast dials but I don't want to have people create contacts with
a 91 prefixed on every number.
Thanks,
Chris
________________________________________
______________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
________________________________________
______________________________
________________________________
Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you.
Ipitomi is a limited company registered in England. Registered Office: 45 Moorfields, London EC2Y 9AE Registration Number: 3576505. VAT number 719086615
Please note that Ipitomi may monitor email traffic data and also the content of email for the purposes of security and staff training. This message (and any associated files) is intended only for the use of the addressee and may contain information that is confidential, subject to copyright or constitutes a trade secret. If you are not the intended recipient you are hereby notified that any dissemination, copying or distribution of this message, or files associated with this message, is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and deleting it from your computer. Any views or opinions presented are solely those of the author and do not necessarily represent those of the company.
________________________________________
______________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
________________________________________
______________________________
|
|
|
|
|