|
Home > Archive > Voice over IP Cisco > November 2007 > Upgrading IPVC/MCU to 5.1.0.24 caused failure to
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Upgrading IPVC/MCU to 5.1.0.24 caused failure to
|
|
| Jefflin Choi 2007-11-26, 1:12 am |
| Hi All,
I've upgraded the MCU 3545 to version 5.1.0.24 and was successful. However
the sccp registration of the mcu on the ccm 5.1.2 failed, Unregistered. From
the logs of the MCU, it says not compatible with MP v2.
I am also trying to upgrade the emp version 5.1.0.27 where according to the
cco it is compatible with mcu 5.1.0.24 however upgrade fails with reason
...."the SW target type different from HW target type"
Could someone point me to the correct direction?
What software does the mcu need to run the 5.1.0.24 and register via sccp on
ccm 5.1?
Thanks!
| |
| Jefflin Choi 2007-11-26, 7:12 am |
| Bad becomes worst.
Tried downgrading MCU version and now it won't boot properly. Seems like the
upload was corrupt.
Can't access the GUI menu of the MCU. Since mcucfg can't be loaded, i do not
know the default snmp read and write string, upgrade doesn't push through
with the snmp string.
Any ideas?
On the console, getting:
========================================
======================================
The last MCU config burn operation wrong: WARNING
Retrieved old volume params with %75 confidence:
Volume Parameters: FAT type: FAT16, sectors per cluster 255
255 FAT copies, 0 clusters, 65535 sectors per FAT
Sectors reserved -1, hidden -1, FAT sectors 16711425
Root dir entries -1, sysId (null) , serial number ffffffff
Label:" " ...
Disk with 512 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT12, sectors per cluster 1
2 FAT copies, 500 clusters, 2 sectors per FAT
Sectors reserved 1, hidden 0, FAT sectors 4
Root dir entries 112, sysId VXDOS12 , serial number ffffffff
Label:" " ...
On Nov 26, 2007 1:21 PM, Jefflin Choi <jefflin.choi@gmail.com> wrote:
> Hi All,
>
> I've upgraded the MCU 3545 to version 5.1.0.24 and was successful. However
> the sccp registration of the mcu on the ccm 5.1.2 failed, Unregistered.
> From the logs of the MCU, it says not compatible with MP v2.
>
> I am also trying to upgrade the emp version 5.1.0.27 where according to
> the cco it is compatible with mcu 5.1.0.24 however upgrade fails with
> reason ..."the SW target type different from HW target type"
>
> Could someone point me to the correct direction?
> What software does the mcu need to run the 5.1.0.24 and register via sccp
> on ccm 5.1?
>
> Thanks!
>
| |
| Jonathan Charles 2007-11-26, 1:11 pm |
| Now it is time for TAC...
Jonathan
On Nov 26, 2007 2:33 AM, Jefflin Choi <jefflin.choi@gmail.com> wrote:
> Bad becomes worst.
> Tried downgrading MCU version and now it won't boot properly. Seems like the
> upload was corrupt.
> Can't access the GUI menu of the MCU. Since mcucfg can't be loaded, i do not
> know the default snmp read and write string, upgrade doesn't push through
> with the snmp string.
>
> Any ideas?
>
> On the console, getting:
> ========================================
======================================
> The last MCU config burn operation wrong: WARNING
> Retrieved old volume params with %75 confidence:
> Volume Parameters: FAT type: FAT16, sectors per cluster 255
> 255 FAT copies, 0 clusters, 65535 sectors per FAT
> Sectors reserved -1, hidden -1, FAT sectors 16711425
> Root dir entries -1, sysId (null) , serial number ffffffff
> Label:" " ...
> Disk with 512 sectors of 512 bytes will be formatted with:
> Volume Parameters: FAT type: FAT12, sectors per cluster 1
> 2 FAT copies, 500 clusters, 2 sectors per FAT
> Sectors reserved 1, hidden 0, FAT sectors 4
> Root dir entries 112, sysId VXDOS12 , serial number ffffffff
> Label:" " ...
>
>
>
>
>
>
> On Nov 26, 2007 1:21 PM, Jefflin Choi <jefflin.choi@gmail.com> wrote:
>
> the sccp registration of the mcu on the ccm 5.1.2 failed, Unregistered. From
> the logs of the MCU, it says not compatible with MP v2.
> the cco it is compatible with mcu 5.1.0.24 however upgrade fails with reason
> ..."the SW target type different from HW target type"
> on ccm 5.1?
>
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
| |
| Jefflin Choi 2007-11-27, 1:12 am |
| successfully recovered it using UploadUtility 1.3.6.
I've successfully upgrade the MCU to 5.1.0.24 and EMP to 5.1.0.27 and all is
working fine.
Thanks.
On 11/26/07, Jonathan Charles <jonvoip@gmail.com> wrote:
>
> Now it is time for TAC...
>
>
>
> Jonathan
>
> On Nov 26, 2007 2:33 AM, Jefflin Choi <jefflin.choi@gmail.com> wrote:
> the
> not
> through
> ========================================
======================================
> However
> From
> to
> reason
> sccp
>
|
|
|
|
|