|
Home > Archive > Voice over IP Cisco > November 2007 > Changing transfer settings in Unity Connection 1.2
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Changing transfer settings in Unity Connection 1.2
|
|
| Patrick Mowry 2007-11-28, 7:12 am |
|
Hello,
I assume I'm just blind, but I'm trying to use the bulk edit tool to change call transfer settings. I want to have calls transfered by the auto attendant to go directly to the users greeting during office hours, but ring there phone after hours. I know that sounds backwards, but it's what I need to do. I need to do this to about 900 of 1200 phones.
Thanks,
| |
| Pat Hayes 2007-11-28, 1:11 pm |
| I hate to be the bearer of bad news, but... I've got bad news. Bulk Edit
(and Bulk Admin) were both written for UC 1.1, where there was only a
single transfer rule, so they don't edit the other two. This is fixed in
the 2.0 tools, but, word on the street is there is no intention of
fixing this in the 1.x versions.
Also, FYI, if you do edit the one rule that you see in the tool, the
changes will be applied to the alternate rule.
-------- Original Message --------
From: "Patrick Mowry" <pmowry@getgds.com>
To: cisco-voip@puck.nether.net
Subject: Changing transfer settings in Unity Connection 1.2
Date: 11/27/2007 10:52 PM
> Hello,
> I assume I'm just blind, but I'm trying to use the bulk edit tool to change call transfer settings. I want to have calls transfered by the auto attendant to go directly to the users greeting during office hours, but ring there phone after hours. I k
now that sounds backwards, but it's what I need to do. I need to do this to about 900 of 1200 phones.
>
> Thanks,
>
>
> ------------------------------------------------------------------------
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Patrick Mowry 2007-11-29, 1:12 pm |
|
Just by luck I have a temporary work around. The DN numbers I do not
want to call during the day are already in another partition and the
Voicemail ports have their own calling search space. So I can just move
the scheduling to the call manager side. But I still need to clean it
up so callers do not get the "please wait while I transfer your call"
and then get voicemail. And when whoever follows behind me they do not
have to wonder what was he thinking.
------------------------------
Date: Wed, 28 Nov 2007 08:40:28 -0500
From: Pat Hayes <pat-cv@wcyv.com>
Subject: Re: [cisco-voip] Changing transfer settings in Unity
Connection 1.2
To: Patrick Mowry <pmowry@getgds.com>
Cc: cisco-voip@puck.nether.net
Message-ID: <474D6FCC.2090005@wcyv.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I hate to be the bearer of bad news, but... I've got bad news. Bulk Edit
(and Bulk Admin) were both written for UC 1.1, where there was only a
single transfer rule, so they don't edit the other two. This is fixed in
the 2.0 tools, but, word on the street is there is no intention of
fixing this in the 1.x versions.
Also, FYI, if you do edit the one rule that you see in the tool, the
changes will be applied to the alternate rule.
|
|
|
|
|