|
Home > Archive > Voice over IP Cisco > November 2007 > Polycom VSX 7000
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| Joel Perez 2007-11-29, 7:11 pm |
| Hey Guys,
Was wondering if anyone has ever tied a PolycommVSX7000 into a CUCM system?
Currently i have configured for this customer the following CUCM5.1.2,
MeetingPlace Express2.0 and an MCU3515.
Everything works as it should, however they asked me to integrate the
Polycom into the existing system?
A normal Polycomm isnt a big deal to add, but this is a full fledged ip
based video system from Polycomm.
I dont even know where to begin.
Any help would be appreciated.
Thanks,
Joel P
| |
| Matthew Saskin 2007-11-29, 7:11 pm |
| a) load SCCP code on it, polycom makes it available
b) run it as a standard H.323 phone, if I recall the polycom's have the
ability to run in H.323 mode but be pointed to the callmanager for call
resolution (instead of having to use a gatekeeper)
-matt
Joel Perez wrote:
> Hey Guys,
>
> Was wondering if anyone has ever tied a PolycommVSX7000 into a CUCM system?
>
> Currently i have configured for this customer the following CUCM5.1.2,
> MeetingPlace Express2.0 and an MCU3515.
> Everything works as it should, however they asked me to integrate the
> Polycom into the existing system?
> A normal Polycomm isnt a big deal to add, but this is a full fledged ip
> based video system from Polycomm.
> I dont even know where to begin.
> Any help would be appreciated.
>
> Thanks,
>
> Joel P
>
>
>
> ------------------------------------------------------------------------
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|