|
Home > Archive > Voice over IP Cisco > December 2007 > SSH access to CUCMBE
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
SSH access to CUCMBE
|
|
| Jason Wydra 2007-12-09, 7:11 pm |
| On 12/9/07, Jason Wydra <jasonwydra@gmail.com> wrote:
>
> Running CUCMBE version 6.0.1. Wondering about the SSH access to the
> CLI. When I try to SSH from a reomte DOS prompt, I get prompted to enter a
> password for the admin account .
>
> I tried to use the same password that was set for the UM Admin/OS
> pages bit it's denied. I didn't install the software and my client doesn't
> know what the SSH CLI login might be. Is there a default password for SSH,
> or a way to reset the current one? I'm trying to get to the TFTP CLI options
> so I can hopefully back-up this system for once.
>
> Thanks,
> Jason
>
| |
| Jonathan Charles 2007-12-10, 1:12 am |
| You need to boot off of the recovery disk and follow the pw change options...
J
On Dec 9, 2007 5:53 PM, Jason Wydra <jasonwydra@gmail.com> wrote:
>
>
>
> On 12/9/07, Jason Wydra <jasonwydra@gmail.com> wrote:
> When I try to SSH from a reomte DOS prompt, I get prompted to enter a
> password for the admin account .
> bit it's denied. I didn't install the software and my client doesn't know
> what the SSH CLI login might be. Is there a default password for SSH, or a
> way to reset the current one? I'm trying to get to the TFTP CLI options so I
> can hopefully back-up this system for once.
>
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
|
|
|
|
|