|
Home > Archive > Voice over IP Cisco > December 2007 > show gatekeeper endpoints
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
show gatekeeper endpoints
|
|
| Jason Aarons \(US\) 2007-12-19, 1:11 pm |
| In CCMadmin I setup a Gatekeeper and Trunk and have them register to a
Gatekeeper.
On the IOS Gatekeeper I type show gatekeeper endpoint and see my two
Subscribers registered properly. They are YYZ-SubA-ICT_1 and
YYZ-SubB-ICT_2 in the show gatekeeper endpoint.
Where does CallManager/IOS get the _ICT_1 or _ICT_2 from as I don't
configure that. I know it just does it, but can you change it from
ICT_X to something else?
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replyingto this message and deleting it
from your computer. Thank you.
| |
| Mike Wydra 2007-12-19, 7:11 pm |
| That number is assigned automatically and cannot be changed.
On 12/19/07, Jason Aarons (US) <jason.aarons@us.didata.com> wrote:
>
> In CCMadmin I setup a Gatekeeper and Trunk and have them register to a
> Gatekeeper.
>
>
>
> On the IOS Gatekeeper I type show gatekeeper endpoint and see my two
> Subscribers registered properly. They are YYZ-SubA-ICT_1 and YYZ-SubB-ICT_2
> in the show gatekeeper endpoint.
>
>
>
> Where does CallManager/IOS get the _*ICT*_1 or _ICT_2 from as I don't
> configure that. I know it just does it, but can you change it from ICT_X to
> something else?
>
>
>
>
>
> ------------------------------
>
> *Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
|
|
|
|
|