|
Home > Archive > Voice over IP Cisco > December 2007 > MWI message light question
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
MWI message light question
|
|
| dschulz 2007-12-20, 7:11 pm |
| The default in Unity is set that a subscriber must listen to the message in
it's entirety, before the MWI light is turned off. Meaning if they only
"partially" listen to the message and hang up, the MWI light remains lit.
Is there anyway to change this (to make MWI turn off on messages being
partially listened to)?
Dave
| |
| Pat Hayes 2007-12-20, 7:11 pm |
| In SAWeb, on the Conversation tab for the user, check 'Mark a message as
saved upon hangup or disconnection'.
-------- Original Message --------
From: "dschulz" <dschulz@skyline-ats.com>
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] MWI message light question
Date: 12/20/2007 3:24 PM
> The default in Unity is set that a subscriber must listen to the message
> in it's entirety, before the MWI light is turned off. Meaning if they
> only "partially" listen to the message and hang up, the MWI light
> remains lit. Is there anyway to change this (to make MWI turn off on
> messages being partially listened to)?
>
> Dave
>
>
>
>
> ------------------------------------------------------------------------
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| dschulz 2007-12-21, 1:12 am |
| Thanks, Pat. I also noted the server-wide configuration for the same item
that you pointed out on the Advanced Settings in the Tools Depot. I
appreciate the help!
Dave
-----Original Message-----
From: Pat Hayes [mailto:pat-cv@wcyv.com]
Sent: Thursday, December 20, 2007 7:04 PM
To: dschulz
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] MWI message light question
In SAWeb, on the Conversation tab for the user, check 'Mark a message as
saved upon hangup or disconnection'.
-------- Original Message --------
From: "dschulz" <dschulz@skyline-ats.com>
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] MWI message light question
Date: 12/20/2007 3:24 PM
> The default in Unity is set that a subscriber must listen to the
> message in it's entirety, before the MWI light is turned off. Meaning
> if they only "partially" listen to the message and hang up, the MWI
> light remains lit. Is there anyway to change this (to make MWI turn
> off on messages being partially listened to)?
>
> Dave
>
>
>
>
> ----------------------------------------------------------------------
> --
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|