| Paul Choi 2007-12-27, 7:11 pm |
| Ok, Thanks!
Paul
----- Original Message ----
From: Matthew Saskin <matt@saskin.net>
To: Paul Choi <asobihoudai@yahoo.com>
Cc: cisco-voip@puck.nether.net
Sent: Thursday, December 27, 2007 12:53:28 PM
Subject: Re: [cisco-voip] hunt groups + hunting with analog lines for inbound calls
Need to involve the telco. Unless the lines are provisioned as DID
trunks (which they aren't) they are not going to pass you any DNIS
information down the line, one to one correlation between physical port
and the respective phone number.
-matt
Paul Choi wrote:
> Is it possible to use hunt groups for the purpose of having inbound
calls hunt from port to port?
>
> I have a 3725 box with eight FXO trunks. What if I have trunks with
4100, 4101, 41....07 and would like for the lines to hunt from 4100 to
4101 if 4100 is occupied etc. Must I involve the telco to setup the hunt
groups at the CO or is there a way of forcing these trunks to hunt
within the router?
>
> Paul
>
>
>
>
>
________________________________________
________________________________________
____
> Never miss a thing. Make Yahoo your home page.
> http://www.yahoo.com/r/hs
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
________________________________________
________________________________________
____
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
|