|
Home > Archive > Voice over IP Cisco > February 2007 > some DNs shouldnt be called from pstn..
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
some DNs shouldnt be called from pstn..
|
|
| gokhan senol 2007-02-05, 7:11 am |
| Hi
i got ccm 4.1.3 and . my DID range 2xxx . i have PRI number and users can be dialed from pri did range(2100-2199).
but i wanna do that some DNs shouldnt be called from pstn.
how can i do this without changingtheir number.
thanks a lot
Gokhan
________________________________________
________________________________________
____
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail beta.
http://new.mail.yahoo.com
| |
| Erick Bergquist 2007-02-05, 7:11 am |
| You can put the same DN in another partition, and make the inbound call CSSon the gateway so that partition is higher in the partition order so that DN gets used instead. Then you can have that DN be a translation pattern, route pattern to block call, go to the main receptionist, whatever.
Sample CSS:
CSS Name: InboundCalls
SpecialHandlingDID
RegularDID
Where you can create a 2100 DN in the SpecialHandlingDID partition and do whatever you want. Since this partition is higher then the RegularDID partition in the CSS order it will be used.
On your other devices(phones, etc) the CSS on them wouldn't have the SpecialHandlingDID partition in their CSS so they won't know about the other 2100 number, etc.
If you have a H.323 gateway you can also have a dial-peer for that number and not route the call to call manager, and just drop it or have a bogus ipv4destination with huntstop and they'll get a busy signal.
----- Original Message ----
From: gokhan senol <gokhanciscottl@yahoo.com>
To: cisco-voip@puck.nether.net
Sent: Monday, February 5, 2007 2:58:17 AM
Subject: [cisco-voip] some DNs shouldnt be called from pstn..
Hi
i got ccm 4.1.3 and . my DID range 2xxx . i have PRI number and userscan be dialed from pri did range(2100-2199).
but i wanna do that some DNs shouldnt be called from pstn.
how can i do this without changing their number.
thanks a lot
Gokhan
Have a burning question? Go to Yahoo! Answers and get answers fromreal people who know. ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
________________________________________
________________________________________
____
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail beta.
http://new.mail.yahoo.com
| |
| Robert Kulagowski 2007-02-05, 7:11 am |
| > i got ccm 4.1.3 and . my DID range 2xxx . i have PRI number and users
> can be dialed from pri did range(2100-2199).
>
> but i wanna do that some DNs shouldnt be called from pstn.
>
> how can i do this without changing their number.
Can you put those numbers into a different partition, and then make sure
that partition isn't in the gateway calling search space.
|
|
|
|
|