| Robert Singleton 2007-02-07, 1:11 pm |
| On Wed, 2007-02-07 at 15:46 +0100, Klein Peter wrote:
> Hi
>
>
>
> Let me also point out that this is the first place to look when you
> have strange fax problems, for example you can send one or two pages
> but then it disconnects. Usually the voice might be OK but the faxes
> always die on this.
I have been told that and I suffer those symptoms, but thus far, I
cannot seem to get an answer on the issue.
My PRIs are on either of two 6608 blades, one in a 6503, one in a 6509.
They are MGCP in the CallManager.
Thus far, I have not been able to find a 'show' in the 650X console to
reveal that counter. Anybody have a suggestion?
Also, clock settings are currently set to 'Network'. In my admittedly
limited experience, which is largely on devices with only 1 PRI
connection, I would normally think that would mean 'external' and thus
get clocking from the PRI.
The alternate setting options include 'internal', which would obviously
be wrong, but I am also offered to use clocking from any of the
individual spans on the 6608. As all the PRIs are provided by the same
carrier, I suppose any of them would do, but how is 'Network' different
from any given span?
Thanks!
|