| Author |
Exchange upgrade & Unity 4.0(5)
|
|
| Duane Priebe 2007-02-07, 1:11 pm |
| I will be performing and upgrade on our Exchange 2000 Server this
weekend to Exchange Server 2003. The physical hardware will remain the
same. Will our Unity 4.0(5) box be ok with this upgrade? What issues
can I expect if any on this project? Any feedback is appreciated.
Thanks!
Duane
| |
| CarlosOrtiz@bayviewfinancial.com 2007-02-07, 1:11 pm |
| I had these versions running together for about a year and a half with no
issues. The only difference was that I started with Exchange 2003 and
Unity 4.03 and then upgraded to 4.05. One thing you may want to look at
is Exchange SP installation/compatibility. I seem to recall some possible
issues if things were not installed in a certain order.
Carlos
"Duane Priebe" <duane@theriverbank.com>
Sent by: cisco-voip-bounces@puck.nether.net
02/07/2007 01:50 PM
To
"cisco-voip@puck-nether.net" <cisco-voip@puck.nether.net>
cc
Subject
[cisco-voip] Exchange upgrade & Unity 4.0(5)
I will be performing and upgrade on our Exchange 2000 Server this weekend
to Exchange Server 2003. The physical hardware will remain the same. Will
our Unity 4.0(5) box be ok with this upgrade? What issues can I expect if
any on this project? Any feedback is appreciated. Thanks!
Duane ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Voll, Scott 2007-02-08, 1:11 pm |
| You will need to upgrade the exchange tools on Unity also and run the
new permissions wizard.
Scott
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Duane Priebe
Sent: Wednesday, February 07, 2007 10:51 AM
To: cisco-voip@puck-nether.net
Subject: [cisco-voip] Exchange upgrade & Unity 4.0(5)
I will be performing and upgrade on our Exchange 2000 Server this
weekend to Exchange Server 2003. The physical hardware will remain the
same. Will our Unity 4.0(5) box be ok with this upgrade? What issues
can I expect if any on this project? Any feedback is appreciated.
Thanks!
Duane
|
|
|
|