| Justin Steinberg 2007-02-07, 7:11 pm |
| Robert,
You need to browse to the 6608 card's internal web server. Do a show
command on the 6500 to find the ip address of the 6608 blade. Then type the
6608's ip address into your web browser. It looks kinda like the phone's
internal web page.
Justin
On 2/7/07, Robert Singleton <rsingleton@novateck.com> wrote:
>
> On Wed, 2007-02-07 at 15:46 +0100, Klein Peter wrote:
>
> I have been told that and I suffer those symptoms, but thus far, I
> cannot seem to get an answer on the issue.
>
> My PRIs are on either of two 6608 blades, one in a 6503, one in a 6509.
> They are MGCP in the CallManager.
>
> Thus far, I have not been able to find a 'show' in the 650X console to
> reveal that counter. Anybody have a suggestion?
>
> Also, clock settings are currently set to 'Network'. In my admittedly
> limited experience, which is largely on devices with only 1 PRI
> connection, I would normally think that would mean 'external' and thus
> get clocking from the PRI.
>
> The alternate setting options include 'internal', which would obviously
> be wrong, but I am also offered to use clocking from any of the
> individual spans on the 6608. As all the PRIs are provided by the same
> carrier, I suppose any of them would do, but how is 'Network' different
> from any given span?
>
> Thanks!
>
>
>
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
|