|
Home > Archive > Voice over IP Cisco > February 2007 > how to config vg248 to send disconnect
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
how to config vg248 to send disconnect
|
|
| James Grace 2007-02-09, 1:11 pm |
| ?
im trying to hook up a paging unit and all works except the disconnect from the port of the vg248. so im getting a busy and dial tone over my speakers when i hang up. Can someone help me with this
James Grace
Systems Engineer
Adcap Network Systems, Inc.
6865 Shiloh Road East, Suite 250
Alpharetta, GA 30005
office: 678-456-6986
direct: 678-456-6761
jgrace@adcapnet.com
www.adcapnet.com <http://www.adcapnet.com/>
| |
| Jason Aarons \(US\) 2007-02-09, 1:11 pm |
| FXS for paging isn't a good design due to varying disconnect supervison
across products. For example a ATA-186 with Valcom 9987 works in CME
but not CCM due to software design.
You should be using a FXO interface and something like a Valcom 2002-A.
I would call your paging vendor (Bogen, Valcom, etc) andask them for a
best practice design.
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of James Grace
Sent: Friday, February 09, 2007 1:10 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] how to config vg248 to send disconnect
?
im trying to hook up a paging unit and all works except the disconnect
from the port of the vg248. so im getting a busy and dial tone over my
speakers when i hang up. Can someone help me with this
James Grace
Systems Engineer
Adcap Network Systems, Inc.
6865 Shiloh Road East, Suite 250
Alpharetta, GA 30005
office: 678-456-6986
direct: 678-456-6761
jgrace@adcapnet.com
www.adcapnet.com <http://www.adcapnet.com/>
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, youare hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictlyprohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message anddeleting it
from your computer. Thank you.
| |
| Paul Choi 2007-02-09, 7:11 pm |
| 1) Did you try configuring disconnect-ack?
2) Did you try using ground-start instead of
loop-start?
Paul
--- James Grace <jgrace@adcapnet.com> wrote:
> ?
> im trying to hook up a paging unit and all works
> except the disconnect from the port of the vg248.
> so im getting a busy and dial tone over my speakers
> when i hang up. Can someone help me with this
>
> James Grace
>
> Systems Engineer
> Adcap Network Systems, Inc.
> 6865 Shiloh Road East, Suite 250
> Alpharetta, GA 30005
>
> office: 678-456-6986
> direct: 678-456-6761
> jgrace@adcapnet.com
> www.adcapnet.com <http://www.adcapnet.com/>
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
________________________________________
________________________________________
____
The fish are biting.
Get more visitors on your site using Yahoo! Search Marketing.
http://searchmarketing.yahoo.com/ar...edsearch_v2.php
|
|
|
|
|