| Jonathan Charles 2007-02-24, 7:11 pm |
| That was it... the second nic was enabled, but not plugged in... I disabled
it, and then I couldn't hear Unity... stopped and restarted Unity, and
everything works... yay!
Jonathan
On 2/24/07, Scott Coner (US) <scott.coner@us.didata.com> wrote:
>
> Do you have NIC teaming enabled? This happened to me before and it
> turned out that someone had enabled NIC teaming but didn't configure it in
> the fault tolerant mode (active/passive) they had it in an active/active
> state.
>
>
>
> Scott
>
>
> ------------------------------
>
> *From:* cisco-voip-bounces@puck.nether.net [mailto:
> cisco-voip-bounces@puck.nether.net] *On Behalf Of *Jonathan Charles
> *Sent:* Saturday, February 24, 2007 5:19 PM
> *To:* cisco-voip@puck-nether.net
> *Subject:* [cisco-voip] New Unity VMAIL Only w/ Exchange, can't record
> messages,names or prompts...
>
>
>
> New install of 4.2(1) vmail only... Exchange 2000 and Win2K...
>
> When subscribers go for self-enrollment, they can't record their name
> (they do, but the system doesn't hear it)... Also, if you try to leave
> messages, no message is left (the system just doesn't seem to be hearing
> it)...
>
> Unity is able to receive DTMF for the CHs... but not human speech...
>
> Any ideas?
>
>
>
> Jonathan
>
> ------------------------------
>
> * Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
|