| Lelio Fulgenzi 2007-02-27, 1:11 pm |
| I'm trying to get trunk groups working. I've followed the steps in the book, but I'm getting failures when trying to make the call. When I remove the trunkgroup on the dialpeer and add the port, calls go through fine. The dialpeer shows up and running (as far as I can tell). Anyone know what I might be missing?
!
trunk group uogdev_pstn_tg
hunt-scheme round-robin
!
trunk group uogdev_911_tg
hunt-scheme sequential
!
controller T1 3/0
framing esf
linecode b8zs
pri-group timeslots 1-24 service mgcp
trunk-group uogdev_pstn_tg timeslots 2-23
trunk-group uogdev_911_tg timeslots 1
!
dial-peer voice 9519901 pots
trunkgroup uogdev_pstn_tg
corlist outgoing uogdev-local-css
destination-pattern 9519.......
forward-digits 10
!
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
....there's no such thing as a bad timbit...
|