| gokhan senol 2007-03-02, 1:11 pm |
| hi
i got ccme router 2800 and pri line. CCME 3.3
intermittently my pstn calls are disconnected.
there is no error under E1 controller. it happens randomly but i dun know why.
do you think it is because of there is no qos in the switch: i created voice vlan and data vlan but did not configure any mls command.
also what is the message DisconnectCause=1Fwhen i run the command sh call history voice id
phone loads: 7.2(2.0) 7940/7960
phone app load ID P00307020200
ccme upgrade or qos or phone firmware?
thnx
r#sh controllers e1
E1 0/0/0 is up.
Applique type is Channelized E1 - balanced
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20060711, FPGA: 13, spm_count = 0
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
CRC Threshold is 320. Reported from firmware is 320.
Data in current interval (765 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
tr#
________________________________________
________________________________________
____
Wantto start your own business?
Learn how on Yahoo! Small Business.
http://smallbusiness.yahoo.com/r-index
|