|
Home > Archive > Voice over IP Cisco > March 2007 > Location
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| Ahmed Elnagar 2007-03-27, 7:11 pm |
| Hello all;
A customer has the following requirements.
he has a location with 20 phones assigned to it, they have a bandwidth which enables them to make only 5 calls at a time. he wants to reserve bandwidth out of the 5 calls bandwidth for a certain user that nobody else can use. is it possible with CM ver 4.1(3)
Thanks and Best Regards
Ahmed A. Elnagar
Network Field Engineer
Advanced Computer Technology (ACT)
16 Fawzy Ramah St.Off Shehab St.Mohandessin, Giza, Egypt
Postal Code:12411 Cairo Egypt
Mob: +2010-2833868
Website: www.act-eg.com
E-mail: aelnagar@act-eg.com
| |
| Matthew Saskin 2007-03-27, 7:11 pm |
| Best choice for that is going to be to configure MLPP or to use a
network based approach (i.e.; tag that phones traffic with a different
DSCP, etc. value) and police traffic at the router level.
-matt
Ahmed Elnagar wrote:
> Hello all;
>
> A customer has the following requirements.
> he has a location with 20 phones assigned to it, they have a bandwidth
> which enables them to make only 5 calls at a time. he wants to reserve
> bandwidth out of the 5 calls bandwidth for a certain user that nobody
> else can use. is it possible with CM ver 4.1(3)
>
> Thanks and Best Regards
> *
> Ahmed A. Elnagar
> *Network Field Engineer
>
> Advanced Computer Technology (ACT)
> 16 Fawzy Ramah St.Off Shehab St.Mohandessin, Giza, Egypt
> Postal Code:12411 Cairo Egypt
>
> *Mob**:* +2010-2833868
> *Website**: *www.act-eg.com
> *E-mail**: *aelnagar@act-eg.com <mailto:aelnagar@act-eg.com>
> ------------------------------------------------------------------------
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
| |
| Matthew Saskin 2007-03-27, 7:11 pm |
| Or possibly just create another location - for the "main" location enter
enough bandwidth for 4 calls, and for the "special" location that the
single phone lives in, put enough bandwidth for 1 call. May not be the
most efficient way of doing things, but it would work I guess.
-matt
Ahmed Elnagar wrote:
> Hello all;
>
> A customer has the following requirements.
> he has a location with 20 phones assigned to it, they have a bandwidth
> which enables them to make only 5 calls at a time. he wants to reserve
> bandwidth out of the 5 calls bandwidth for a certain user that nobody
> else can use. is it possible with CM ver 4.1(3)
>
> Thanks and Best Regards
> *
> Ahmed A. Elnagar
> *Network Field Engineer
>
> Advanced Computer Technology (ACT)
> 16 Fawzy Ramah St.Off Shehab St.Mohandessin, Giza, Egypt
> Postal Code:12411 Cairo Egypt
>
> *Mob**:* +2010-2833868
> *Website**: *www.act-eg.com
> *E-mail**: *aelnagar@act-eg.com <mailto:aelnagar@act-eg.com>
> ------------------------------------------------------------------------
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
| |
| Robert Kulagowski 2007-03-27, 7:11 pm |
| > A customer has the following requirements.
> he has a location with 20 phones assigned to it, they have a bandwidth
> which enables them to make only 5 calls at a time. he wants to reserve
> bandwidth out of the 5 calls bandwidth for a certain user that nobody
> else can use. is it possible with CM ver 4.1(3)
I think that you're actually talking about two different things:
1) Location-based CAC (Call Admission Control). We use this because we
have a centralized Unity system with remote offices. We set location
bandwidth (so you would do 5 calls times the bandwidth per call). The
sixth call would then invoke AAR and could be routed via PSTN.
2) MLPP (Multi-level Precedence and Preemption). Your "special user"
could have a code which would make their call a priority call and would
then cause one of the other calls to terminate if there weren't enough
resources.
So, a combination of those two should allow you to achieve what you want.
| |
| Ahmed Elnagar 2007-03-27, 7:11 pm |
| yes I think ot this but a problem pop up to me. what if the phone (special one) wants to make a conference with the internal 20 phones (which should not be restricted), he will not be able to do so. i guess all the phones have to be in single location but I dont know how to dedicate a bandwidth for a certain phone. (using DSCP is not applicable for me at all because it is a very huge switching network and the locations to diff. differenate customers from each other) it is a Service Provider solution.
Thanks and Best Regards
Ahmed A. Elnagar
Network Field Engineer
Advanced Computer Technology (ACT)
16 Fawzy Ramah St.Off Shehab St.Mohandessin, Giza, Egypt
Postal Code:12411 Cairo Egypt
Mob: +2010-2833868
Website: www.act-eg.com
E-mail: aelnagar@act-eg.com
________________________________
From: Matthew Saskin [mailto:matt@saskin.net]
Sent: Tue 27-Mar-07 9:22 PM
To: Ahmed Elnagar
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Location
Or possibly just create another location - for the "main" location enter
enough bandwidth for 4 calls, and for the "special" location that the
single phone lives in, put enough bandwidth for 1 call. May not be the
most efficient way of doing things, but it would work I guess.
-matt
Ahmed Elnagar wrote:
> Hello all;
>
> A customer has the following requirements.
> he has a location with 20 phones assigned to it, they have a bandwidth
> which enables them to make only 5 calls at a time. he wants to reserve
> bandwidth out of the 5 calls bandwidth for a certain user that nobody
> else can use. is it possible with CM ver 4.1(3)
>
> Thanks and Best Regards
> *
> Ahmed A. Elnagar
> *Network Field Engineer
>
> Advanced Computer Technology (ACT)
> 16 Fawzy Ramah St.Off Shehab St.Mohandessin, Giza, Egypt
> Postal Code:12411 Cairo Egypt
>
> *Mob**:* +2010-2833868
> *Website**: *www.act-eg.com
> *E-mail**: *aelnagar@act-eg.com <mailto:aelnagar@act-eg.com>
> ------------------------------------------------------------------------
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
| |
| Ahmed Elnagar 2007-03-27, 7:11 pm |
| thank you all for ut fast replies. I know location based MLPP would do it for me but still that is not the requirement the customer doesnot want to drop running calls just he want to assign a certain bandwidth to that special user and nobody else can use it. ther is no PSTN connections that I can use AAR with it.
Thanks and Best Regards
Ahmed A. Elnagar
Network Field Engineer
Advanced Computer Technology (ACT)
16 Fawzy Ramah St.Off Shehab St.Mohandessin, Giza, Egypt
Postal Code:12411 Cairo Egypt
Mob: +2010-2833868
Website: www.act-eg.com
E-mail: aelnagar@act-eg.com
________________________________
From: cisco-voip-bounces@puck.nether.net on behalf of Robert Kulagowski
Sent: Tue 27-Mar-07 9:26 PM
To: Ahmed Elnagar
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Location
> A customer has the following requirements.
> he has a location with 20 phones assigned to it, they have a bandwidth
> which enables them to make only 5 calls at a time. he wants to reserve
> bandwidth out of the 5 calls bandwidth for a certain user that nobody
> else can use. is it possible with CM ver 4.1(3)
I think that you're actually talking about two different things:
1) Location-based CAC (Call Admission Control). We use this because we
have a centralized Unity system with remote offices. We set location
bandwidth (so you would do 5 calls times the bandwidth per call). The
sixth call would then invoke AAR and could be routed via PSTN.
2) MLPP (Multi-level Precedence and Preemption). Your "special user"
could have a code which would make their call a priority call and would
then cause one of the other calls to terminate if there weren't enough
resources.
So, a combination of those two should allow you to achieve what you want.
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Matt Slaga \(US\) 2007-03-27, 7:11 pm |
| In any case, in order for them to do 20 conference calls at the local
site, you would need hardware conference resources at that location.
With them local, the locations would not count if the devices are in the
same location.
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Ahmed Elnagar
Sent: Tuesday, March 27, 2007 3:42 PM
To: Robert Kulagowski
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Location
thank you all for ut fast replies. I know location based MLPP would do
it for me but still that is not the requirement the customer doesnot
want to drop running calls just he want to assign a certain bandwidth to
that special user and nobody else can use it. ther is no PSTN
connections that I can use AAR with it.
Thanks and Best Regards
Ahmed A. Elnagar
Network Field Engineer
Advanced Computer Technology (ACT)
16 Fawzy Ramah St.Off Shehab St.Mohandessin, Giza, Egypt
Postal Code:12411 Cairo Egypt
Mob: +2010-2833868
Website: www.act-eg.com
E-mail: aelnagar@act-eg.com
________________________________
From: cisco-voip-bounces@puck.nether.net on behalf of Robert Kulagowski
Sent: Tue 27-Mar-07 9:26 PM
To: Ahmed Elnagar
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Location
> A customer has the following requirements.
> he has a location with 20 phones assigned to it, they have a bandwidth
> which enables them to make only 5 calls at a time. he wants to reserve
> bandwidth out of the 5 calls bandwidth for a certain user that nobody
> else can use. is it possible with CM ver 4.1(3)
I think that you're actually talking about two different things:
1) Location-based CAC (Call Admission Control). We use this because we
have a centralized Unity system with remote offices. We set location
bandwidth (so you would do 5 calls times the bandwidth per call).The
sixth call would then invoke AAR and could be routed via PSTN.
2) MLPP (Multi-level Precedence and Preemption). Your "special user"
could have a code which would make their call a priority call and would
then cause one of the other calls to terminate if there weren't enough
resources.
So, a combination of those two should allow you to achieve what you
want.
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
| |
| Ahmed Elnagar 2007-03-27, 7:11 pm |
| so they all have to be in one location, ok for MLPP cannot it be just less " aggressive" for example can it give the call that will be cleared a timer say 1 min or so that his/her call will be cleared due to a high priority call is asking for the bandwidth??
Thanks and Best Regards
Ahmed A. Elnagar
Network Field Engineer
Advanced Computer Technology (ACT)
16 Fawzy Ramah St.Off Shehab St.Mohandessin, Giza, Egypt
Postal Code:12411 Cairo Egypt
Mob: +2010-2833868
Website: www.act-eg.com
E-mail: aelnagar@act-eg.com
________________________________
From: Matt Slaga (US) [mailto:Matt.Slaga@us.didata.com]
Sent: Tue 27-Mar-07 9:55 PM
To: Ahmed Elnagar; Robert Kulagowski
Cc: cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] Location
In any case, in order for them to do 20 conference calls at the local site, you would need hardware conference resources at that location. With them local, the locations would not count if the devices are in the same location.
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Ahmed Elnagar
Sent: Tuesday, March 27, 2007 3:42 PM
To: Robert Kulagowski
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Location
thank you all for ut fast replies. I know location based MLPP would do it for me but still that is not the requirement the customer doesnot want to drop running calls just he want to assign a certain bandwidth to that special user and nobody else can use it. ther is no PSTN connections that I can use AAR with it.
Thanks and Best Regards
Ahmed A. Elnagar
Network Field Engineer
Advanced Computer Technology (ACT)
16 Fawzy Ramah St.Off Shehab St.Mohandessin, Giza, Egypt
Postal Code:12411 Cairo Egypt
Mob: +2010-2833868
Website: www.act-eg.com
E-mail: aelnagar@act-eg.com
________________________________
From: cisco-voip-bounces@puck.nether.net on behalf of Robert Kulagowski
Sent: Tue 27-Mar-07 9:26 PM
To: Ahmed Elnagar
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Location
> A customer has the following requirements.
> he has a location with 20 phones assigned to it, they have a bandwidth
> which enables them to make only 5 calls at a time. he wants to reserve
> bandwidth out of the 5 calls bandwidth for a certain user that nobody
> else can use. is it possible with CM ver 4.1(3)
I think that you're actually talking about two different things:
1) Location-based CAC (Call Admission Control). We use this because we
have a centralized Unity system with remote offices. We set location
bandwidth (so you would do 5 calls times the bandwidth per call). The
sixth call would then invoke AAR and could be routed via PSTN.
2) MLPP (Multi-level Precedence and Preemption). Your "special user"
could have a code which would make their call a priority call and would
then cause one of the other calls to terminate if there weren't enough
resources.
So, a combination of those two should allow you to achieve what you want.
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck..nether.net/mailman/listinfo/cisco-voip <https://puck.nether.net/mailman/listinfo/cisco-voip>
________________________________
Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.
| |
| Matt Slaga \(US\) 2007-03-27, 7:11 pm |
| No, it's not graceful by any means. As soon as the 1 user dials out,
one of the other connections is dropped immediately.
From: Ahmed Elnagar [mailto:aelnagar@ACT-EG.COM]
Sent: Tuesday, March 27, 2007 4:16 PM
To: Matt Slaga (US); Robert Kulagowski
Cc: cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] Location
so they all have to be in one location, ok for MLPP cannot it be just
less " aggressive" for example can it give the call that will be cleared
a timer say 1 min or so that his/her call will be cleared due to a high
priority call is asking for the bandwidth??
Thanks and Best Regards
Ahmed A. Elnagar
Network Field Engineer
Advanced Computer Technology (ACT)
16 Fawzy Ramah St.Off Shehab St.Mohandessin, Giza,Egypt
Postal Code:12411 Cairo Egypt
Mob: +2010-2833868
Website: www.act-eg.com
E-mail: aelnagar@act-eg.com
________________________________
From: Matt Slaga (US) [mailto:Matt.Slaga@us.didata.com]
Sent: Tue 27-Mar-07 9:55 PM
To: Ahmed Elnagar; Robert Kulagowski
Cc: cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] Location
In any case,in order for them to do 20 conference calls at the local
site, you would need hardware conference resources at that location.
With them local, the locations would not count if the devices are in the
same location.
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Ahmed Elnagar
Sent: Tuesday, March 27, 2007 3:42 PM
To: Robert Kulagowski
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Location
thank you all for ut fast replies. I know location based MLPP would do
it for me butstill that is not the requirement the customer doesnot
want to drop running calls just he want to assign a certain bandwidth to
that special user and nobody else can use it. ther is no PSTN
connections that I can use AAR with it.
Thanks and Best Regards
Ahmed A. Elnagar
Network Field Engineer
Advanced Computer Technology (ACT)
16 Fawzy Ramah St.Off Shehab St.Mohandessin, Giza, Egypt
Postal Code:12411 Cairo Egypt
Mob: +2010-2833868
Website: www.act-eg.com
E-mail: aelnagar@act-eg.com
________________________________
From: cisco-voip-bounces@puck.nether.net on behalf of Robert Kulagowski
Sent: Tue 27-Mar-07 9:26 PM
To: Ahmed Elnagar
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Location
> A customer has the following requirements.
> he has a location with 20 phones assigned to it, they have a bandwidth
> which enables them to make only 5 calls at a time. he wants to reserve
> bandwidth out of the 5 calls bandwidth for a certain user that nobody
>else can use. is it possible with CM ver 4.1(3)
I think that you're actually talking about two different things:
1) Location-based CAC (Call Admission Control). We use this because we
have a centralized Unity system with remote offices. We set location
bandwidth (so you would do 5 calls times the bandwidth per call). The
sixth call would then invoke AAR and could be routed via PSTN.
2) MLPP (Multi-level Precedence and Preemption). Your "special user"
could have a code which would make their call a priority call and would
then cause one of the other calls to terminate if there weren't enough
resources.
So, a combination of those two should allow you to achieve what you
want.
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck..nether.net/mailman/listinfo/cisco-voip
<https://puck.nether.net/mailman/listinfo/cisco-voip>
________________________________
Disclaimer: This e-mail communication andany attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from yourcomputer. Thank you.
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thankyou.
|
|
|
|
|