Voice over IP Cisco - CME outbound voice problems

This is Interesting: Free IT Magazines  
Home > Archive > Voice over IP Cisco > March 2007 > CME outbound voice problems





You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

Author CME outbound voice problems
Johnny Crothers

2007-03-31, 1:12 am

Hi,



Weird one..



Got a problem where outbound calls succeed but no voice, I get the
following message, I've found that it's a problem with FX ports but not
an E1.



Mar 30 14:53:02.688: flex_dsprm_tdm_xconn: voice-port(0/3/0),
dsp_channel(/0/0/0)



The problem has only occurred since there was a translation rule added,
I've removed the profile from the voice port, shut and unshut.. this
seemed to resolve the problem for about 10 minutes then it occurred
again...



Anyone have any clues?



voice-port 0/3/0:15

translation-profile incoming incoming_ddi

translation-profile outgoing strip_9

no comfort-noise

cptone GB

bearer-cap Speech

!



voice translation-rule 1

rule 1 /784888/ /221/

rule 2 /747303/ /227/

rule 3 /747300/ /222/

rule 4 /747308/ /237/

rule 5 /747302/ /248/

rule 6 /747306/ /232/

rule 7 /747307/ /240/

rule 8 /747309/ /238/

rule 9 /747305/ /231/

rule 10 /747304/ /301/

!

voice translation-profile incoming_ddi

translate called 1



****************************************
******************************
Any opinions expressed in the email are those of the individual and not necessarily the company. This email and any files transmitted with it are confidential and solely for the use of the intended recipient. If you are not the intended recipient or the person responsible for delivering it to the intended recipient, be advised that you have received this email in error and that any dissemination, distribution, copying or use is strictly prohibited.

If you have received this email in error, or if you are concerned with the content of this email please e-mail to: e-security.support@vanco.info

The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While the sender has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You shouldcarry out your own virus checks before opening any attachments to this e-mail.

Vanco UK Ltd Registered in England No: 2296733 Registered Office: John Busch House, 277 London Road, Isleworth, Middlesex TW7 5AX
****************************************
******************************


Sponsored Links






Free braindumps | Software forum | Database administration forum

Copyright 2003 - 2008 webservertalk.com