|
Home > Archive > Voice over IP Cisco > April 2007 > VMWare CM504 to 5.11 Failure
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
VMWare CM504 to 5.11 Failure
|
|
| Fred Fern 2007-04-01, 1:11 pm |
| I've attempted to upgrade from 5.04 to 5.11 going on 5 times now and have
tried many variations, this last attempt was a fresh install of 5.04 and
everything appeared to work fine before hand. In the end it takes about 4
hours and eventually failes with the following errors. The VM is configured
for 2GB RAM and 40GB IDE drives. Any thoughts?
========================================
========================================
===============
informix
Stop DBMS
su -c 'if [ -f /usr/local/cm/db/informix/local/ids.env ]; then source
/usr/local/cm/db/informix/local/ids.env l2; fi ; onmode -yuk' - informix
Found compressed /usr/local/cm/install/ids/csdk-install.tar.gz
Performing IDS CSDK Install
cd /tmp/idsinstall ; source /usr/local/cm/db/informix/local/ids.env ;
../installclientsdk -options /usr/local/cm/db/informix/local/silent.ini
-silent
Inside setupODBC ...
Inside dbllib.py getDBName(1)...
pipe.close() Failed w/ exit code: 253
Inside getDBNameFromPartB...
dbname so far [ccm0500v0000]
final dbname is [ccm0500v0001]
dbname = [ccm0500v0001]
Updating [/etc/odbcinst.ini]
Updating [/etc/odbc.ini]
Getting the OLD DB Name
pipe.close() Failed w/ exit code: 253
Inside getDBNameFromPartB...
dbname_old = [ccm0500v0000]
Found /usr/local/cm/install/ids/idsjdbc.tar
Performing JDBC Install
cp -f /usr/local/cm/install/ids/idsjdbc.tar
/usr/local/cm/db/informix/jdbc.tar
cd /usr/local/cm/db/informix ; tar xf /usr/local/cm/db/informix/jdbc.tar
for J in /usr/local/cm/db/informix/jdbc/lib/*.jar ; do ln -s $J
/usr/local/thirdparty/jakarta-tomcat/common/lib ; done
Found compressed /usr/local/cm/install/ids/ertools.tar.gz
Performing ERTools Install
cp -f /usr/local/cm/install/ids/ertools.tar.gz
/usr/local/cm/db/informix/ertools.tar.gz
cd /usr/local/cm/db/informix ; tar fxz
/usr/local/cm/db/informix/ertools.tar.gz
/usr/local/cm/bin/dbl init L2 5.1.1.3000-5
Inside doActionL2Update ...
Inside doL2Post ...
Verifying SDI directory [/var/log/active/cm/trace/dbl/sdi]
chown database.ccmbase /var/log/active/cm/trace/dbl/sdi
chmod 775 /var/log/active/cm/trace/dbl/sdi
(odbc setup moved to dbl init)
Inside doL2Post_setPublisher...
No publisher record migrated.
Inside doL2_migrateDB...
Inside fixSQLLibPaths....
Inside fixSQLLibPaths....
Inside installdb ...
Inside dbllib.py getDBName(1)...
pipe.close() Failed w/ exit code: 253
Inside getDBNameFromPartB...
dbname so far [ccm0500v0000]
final dbname is [ccm0500v0001]
Start DBMS
su -c 'if [ -f /usr/local/cm/db/informix/local/ids.env ]; then source
/usr/local/cm/db/informix/local/ids.env l2; fi ; oninit' - informix
IDSWillStart...ok
Using port [54320]
sql ccm0500v0001 /usr/local/cm/db/sql/dbfuncs.sql.pathed.sql
sql ccm0500v0001 /usr/local/cm/db/sql/makedb.sql
GrantDBA
csv DSN=ccm_super;Servername=localhost_ccm_b
/usr/local/cm/db/csv
csv DSN=ccm_super;Servername=localhost_ccm_b
/usr/local/cm/db/csv/products
xml DSN=ccm_super;Servername=localhost_ccm_b
/usr/local/cm/db/xml/xml
catalog DSN=ccm_super;Servername=localhost_ccm_b
AlarmCatalog
/usr/local/cm/db/xml/alarmcatalog
catalog DSN=ccm_super;Servername=localhost_ccm_b
TraceCatalog
/usr/local/cm/db/xml/tracecatalog
Convert Database 5 to 6: DSN=ccm_b;Servername=localhost_ccm to
DSN=ccm_super;Servername=localhost_ccm_b
convert5to6: rc=49
sql ccm0500v0001 /usr/local/cm/db/sql/dbl/migration/conv5to6_auto_fix.sql
sql ccm0500v0001 /usr/local/cm/db/sql/dbl_common
sql ccm0500v0001 /usr/local/cm/db/sql/dbl
sql ccm0500v0001 /usr/local/cm/db/sql/dbl_gen
sql ccm0500v0001 /usr/local/cm/db/sql/dbl_trig
sql ccm0500v0001 /usr/local/cm/db/sql/ccm
sql ccm0500v0001 /usr/local/cm/db/informix/ertools/checksum/checksum.sql
Update Statistics DSN=ccm_super;Servername=localhost_ccm_b
Failure 1
Stop DBMS
su -c 'if [ -f /usr/local/cm/db/informix/local/ids.env ]; then source
/usr/local/cm/db/informix/local/ids.env l2; fi ; onmode -yuk' - informix
pipe.close() Failed w/ exit code: 253
Inside getDBNameFromPartB...
/usr/local/cm/bin/dbl start l2 --safe --nopreflight
IDS L2 Migration
rm -f /tmp/*.txt /tmp/*.log /tmp/*.err
/var/log/active/cm/trace/dbl/sdi/psqlx /tmp/*.bin /tmp/af* /tmp/shmem*
Inside getPublisherFromPrefs...
su -l informix -s /bin/sh -c 'source /usr/local/cm/db/dblenv.bash
/usr/local/cm ; source /usr/local/cm/db/informix/local/ids.env L2 ;
/usr/local/cm/bin/installdb -i -p 54320 -f L2 /usr/local/cm
/partB/usr/local/cm 5.1.1.3000-5 5.0.4.2000-1 installdb_l2.log'
cm-dbl-install [1]
04/01/2007 01:12:01 upgrade_install.sh|AppInstall failed (1)|<LVL::Error>
04/01/2007 01:12:01 upgrade_install.sh|Cleaning up download...|<LVL::Info>
04/01/2007 01:12:01 upgrade_install.sh|Removing /common/download/cisco-
ipt-k9-patch5.1.1.3000-5.*|<LVL::Info>
04/01/2007 01:12:01 upgrade_install.sh|Removing
/common/download/5.1.1.3000-5|<LVL::Info>
04/01/2007 01:12:02 upgrade_install.sh|Cleaning up misc...|<LVL::Info>
04/01/2007 01:12:04 upgrade_install.sh|Dumping /usr disk usage to
/usr/local/platform/conf/usr_du_out.txt|<LVL::Info>
04/01/2007 01:12:06 upgrade_install.sh|Cleaning up
rpm_archive...|<LVL::Info>
04/01/2007 01:12:06 upgrade_install.sh|Removing
/common/rpm-archive/5.1.1.3000-5|<LVL::Info>
04/01/2007 01:12:07 upgrade_install.sh|CSA Status = 0|<LVL::Debug>
04/01/2007 01:12:07 upgrade_install.sh|/etc/init.d/ciscosec
start|<LVL::Info>
04/01/2007 01:12:10 upgrade_install.sh|(CAPTURE) Starting ciscosec: [ OK
]|<LVL::Debug>
04/01/2007 01:12:10 upgrade_install.sh|Stop IOWAIT monitor|<LVL::Info>
04/01/2007 01:12:11 upgrade_install.sh|1|<LVL::Debug>
| |
| Jonathan Charles 2007-04-01, 1:11 pm |
| Hard drives for CCM5 must be 72GB... you don't have enough space for your B
partition, so it is dying...
Jonathan
On 4/1/07, Fred Fern <freddfern@gmail.com> wrote:
>
> I've attempted to upgrade from 5.04 to 5.11 going on 5 times now and have
> tried many variations, this last attempt was a fresh install of 5.04 and
> everything appeared to work fine before hand. In the end it takes about 4
> hours and eventually failes with the following errors. The VM is configured
> for 2GB RAM and 40GB IDE drives. Any thoughts?
>
>
>
> ========================================
========================================
===============
>
> informix
> Stop DBMS
> su -c 'if [ -f /usr/local/cm/db/informix/local/ids.env ]; then source
> /usr/local/cm/db/informix/local/ids.env l2; fi ; onmode -yuk' - informix
> Found compressed /usr/local/cm/install/ids/csdk- install.tar.gz
> Performing IDS CSDK Install
> cd /tmp/idsinstall ; source /usr/local/cm/db/informix/local/ids.env ;
> ./installclientsdk -options /usr/local/cm/db/informix/local/silent.ini
> -silent
> Inside setupODBC ...
> Inside dbllib.py getDBName(1)...
> pipe.close() Failed w/ exit code: 253
> Inside getDBNameFromPartB...
> dbname so far [ccm0500v0000]
> final dbname is [ccm0500v0001]
> dbname = [ccm0500v0001]
> Updating [/etc/odbcinst.ini]
> Updating [/etc/odbc.ini]
> Getting the OLD DB Name
> pipe.close() Failed w/ exit code: 253
> Inside getDBNameFromPartB...
> dbname_old = [ccm0500v0000]
> Found /usr/local/cm/install/ids/idsjdbc.tar
> Performing JDBC Install
> cp -f /usr/local/cm/install/ids/idsjdbc.tar
> /usr/local/cm/db/informix/jdbc.tar
> cd /usr/local/cm/db/informix ; tar xf /usr/local/cm/db/informix/jdbc.tar
> for J in /usr/local/cm/db/informix/jdbc/lib/*.jar ; do ln -s $J
> /usr/local/thirdparty/jakarta-tomcat/common/lib ; done
> Found compressed /usr/local/cm/install/ids/ertools.tar.gz
> Performing ERTools Install
> cp -f /usr/local/cm/install/ids/ertools.tar.gz
> /usr/local/cm/db/informix/ertools.tar.gz
> cd /usr/local/cm/db/informix ; tar fxz
> /usr/local/cm/db/informix/ertools.tar.gz
> /usr/local/cm/bin/dbl init L2 5.1.1.3000-5
> Inside doActionL2Update ...
> Inside doL2Post ...
> Verifying SDI directory [/var/log/active/cm/trace/dbl/sdi]
> chown database.ccmbase /var/log/active/cm/trace/dbl/sdi
> chmod 775 /var/log/active/cm/trace/dbl/sdi
> (odbc setup moved to dbl init)
> Inside doL2Post_setPublisher...
> No publisher record migrated.
> Inside doL2_migrateDB...
> Inside fixSQLLibPaths....
> Inside fixSQLLibPaths....
> Inside installdb ...
> Inside dbllib.py getDBName(1)...
> pipe.close() Failed w/ exit code: 253
> Inside getDBNameFromPartB...
> dbname so far [ccm0500v0000]
> final dbname is [ccm0500v0001]
> Start DBMS
> su -c 'if [ -f /usr/local/cm/db/informix/local/ids.env ]; then source
> /usr/local/cm/db/informix/local/ids.env l2; fi ; oninit' - informix
> IDSWillStart...ok
> Using port [54320]
> sql ccm0500v0001 /usr/local/cm/db/sql/dbfuncs.sql.pathed.sql
> sql ccm0500v0001 /usr/local/cm/db/sql/makedb.sql
> GrantDBA
> csv DSN=ccm_super;Servername=localhost_ccm_b
/usr/local/cm/db/csv
> csv DSN=ccm_super;Servername=localhost_ccm_b
/usr/local/cm/db/csv/products
> xml DSN=ccm_super;Servername=localhost_ccm_b
/usr/local/cm/db/xml/xml
> catalog DSN=ccm_super;Servername=localhost_ccm_b
AlarmCatalog
> /usr/local/cm/db/xml/alarmcatalog
> catalog DSN=ccm_super;Servername=localhost_ccm_b
TraceCatalog
> /usr/local/cm/db/xml/tracecatalog
> Convert Database 5 to 6: DSN=ccm_b;Servername=localhost_ccm to
> DSN=ccm_super;Servername=localhost_ccm_b
> convert5to6: rc=49
> sql ccm0500v0001 /usr/local/cm/db/sql/dbl/migration/conv5to6_auto_fix.sql
> sql ccm0500v0001 /usr/local/cm/db/sql/dbl_common
> sql ccm0500v0001 /usr/local/cm/db/sql/dbl
> sql ccm0500v0001 /usr/local/cm/db/sql/dbl_gen
> sql ccm0500v0001 /usr/local/cm/db/sql/dbl_trig
> sql ccm0500v0001 /usr/local/cm/db/sql/ccm
> sql ccm0500v0001 /usr/local/cm/db/informix/ertools/checksum/checksum.sql
> Update Statistics DSN=ccm_super;Servername=localhost_ccm_b
> Failure 1
> Stop DBMS
> su -c 'if [ -f /usr/local/cm/db/informix/local/ids.env ]; then source
> /usr/local/cm/db/informix/local/ids.env l2; fi ; onmode -yuk' - informix
> pipe.close() Failed w/ exit code: 253
> Inside getDBNameFromPartB...
> /usr/local/cm/bin/dbl start l2 --safe --nopreflight
> IDS L2 Migration
> rm -f /tmp/*.txt /tmp/*.log /tmp/*.err
> /var/log/active/cm/trace/dbl/sdi/psqlx /tmp/*.bin /tmp/af* /tmp/shmem*
> Inside getPublisherFromPrefs...
> su -l informix -s /bin/sh -c 'source /usr/local/cm/db/dblenv.bash
> /usr/local/cm ; source /usr/local/cm/db/informix/local/ids.env L2 ;
> /usr/local/cm/bin/installdb -i -p 54320 -f L2 /usr/local/cm
> /partB/usr/local/cm 5.1.1.3000-5 5.0.4.2000-1 installdb_l2.log'
> cm-dbl-install [1]
> 04/01/2007 01:12:01 upgrade_install.sh|AppInstall failed (1)|<LVL::Error>
> 04/01/2007 01:12:01 upgrade_install.sh|Cleaning up download...|<LVL::Info>
>
> 04/01/2007 01:12:01 upgrade_install.sh|Removing /common/download/cisco-
> ipt-k9-patch5.1.1.3000-5.*|<LVL::Info>
> 04/01/2007 01:12:01 upgrade_install.sh|Removing
> /common/download/5.1.1.3000-5|<LVL::Info>
> 04/01/2007 01:12:02 upgrade_install.sh|Cleaning up misc...|<LVL::Info>
> 04/01/2007 01:12:04 upgrade_install.sh|Dumping /usr disk usage to
> /usr/local/platform/conf/usr_du_out.txt|<LVL::Info>
> 04/01/2007 01:12:06 upgrade_install.sh|Cleaning up
> rpm_archive...|<LVL::Info>
> 04/01/2007 01:12:06 upgrade_install.sh|Removing
> /common/rpm-archive/5.1.1.3000-5|<LVL::Info>
> 04/01/2007 01:12:07 upgrade_install.sh|CSA Status = 0|<LVL::Debug>
> 04/01/2007 01:12:07 upgrade_install.sh|/etc/init.d/ciscosec
> start|<LVL::Info>
> 04/01/2007 01:12:10 upgrade_install.sh|(CAPTURE) Starting ciscosec: [
> OK ]|<LVL::Debug>
> 04/01/2007 01:12:10 upgrade_install.sh|Stop IOWAIT monitor|<LVL::Info>
> 04/01/2007 01:12:11 upgrade_install.sh|1|<LVL::Debug>
>
>
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
| |
| Fred Fern 2007-04-02, 1:11 pm |
| I tried with 72GB drives and got to the same point? So I started from
scratch again and selected to upgrade during install (Yes - to the ES or SR
question during the intial installation), pointed it to the .sgn upgrade
file for 5.1 and about an hour later it completed and is now working like a
champ. I still have no idea why the upgrade was failing when it was
attempted from within 5.04 but upgrading during the install worked great?
Fredd
On 4/1/07, Jonathan Charles <jonvoip@gmail.com > wrote:
> Hard drives for CCM5 must be 72GB... you don't have enough space for your
> B partition, so it is dying...
>
>
> Jonathan
>
> On 4/1/07, Fred Fern < freddfern@gmail.com > wrote:
>
>
|
|
|
|
|