| Jonathan Charles 2007-04-03, 1:12 pm |
| Right, that is what I ended up doing anyway...
Do you know if there is a max number of num-exp and if so, what it might be?
Jonathan
On 4/3/07, Jim McBurnett <jim@tgasolutions.com> wrote:
>
> Jonathan,
>
> Use num-exp…
>
>
>
> I had a problem like this and just built an excel spreadsheet
>
> Entered the DID on one side and the internal on the other and concatenated
> it…
>
> Then walla..
>
> I did 65 or so..
>
> Sure it was a little cumbersome the first time.. but that was it..
>
>
>
> Jim
>
>
>
> *From:* cisco-voip-bounces@puck.nether.net [mailto:
> cisco-voip-bounces@puck.nether.net] *On Behalf Of *Jonathan Charles
> *Sent:* Tuesday, April 03, 2007 12:56 PM
> *To:* Paul Choi
> *Cc:* cisco-voip
> *Subject:* Re: [cisco-voip] Need more than 15 translation rules for an
> inboundtranslation on CCME
>
>
>
> right, but only on the outbound by using 128 dial-peers...
>
> For the inbound you can only use one...
>
> If I am wrong, please show a config example of how this is supposed to
> work...
>
>
>
> Jonathan
>
> On 4/3/07, *Paul Choi* <asobihoudai@yahoo.com> wrote:
>
> Jonathan,
>
> I think there's a misunderstanding here. Voice
> translation rules are a part of the VOICE subset of
> commands of an IOS image. You can have up to 15 rules
> underneath every 'voice translation rule' but you can
> specify up to 128 voice translation rules giving you
> an option to have 1920 translation patterns to
> manipulate numbers.
>
> HTH,
> Paul
>
>
> --- Jonathan Charles < jonvoip@gmail.com> wrote:
>
>
>
>
>
>
> ________________________________________
________________________________________
____
> Now that's room service! Choose from over 150,000 hotels
> in 45,000 destinations on Yahoo! Travel to find your fit.
> http://farechase.yahoo.com/promo-generic-14795097
>
>
>
|