|
Home > Archive > Voice over IP Cisco > April 2007 > Call Mgr Server Data
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Call Mgr Server Data
|
|
| CarlosOrtiz@bayviewfinancial.com 2007-04-24, 7:11 pm |
| Is collecting SNMP and WMI data from Call Mgr servers fully supported by
Cisco. We want to start collecting information about our servers but want
to make sure we do not introduce anything that is not TAC supported.
Carlos
| |
| Mike Lay \(milay\) 2007-04-24, 7:11 pm |
| Any application that has not been certified with cisco to work with the
CCM would be unsupported. If this tool was causing issue with CCM TAC
would ask that it be stopped.
CUOM as other 3rd party supported applications uses the WMI interface to
subscribe for events, etc... Pulling event logs from the servers can
cause high CPU on the server it is being pulled from the server:
CSCsh75491 <http://cdets.cisco.com/apps/goto?identifier=CSCsh75491>
I would recommend AXL/Soap or the SNMP mibs as a interface to pull the
performance data rather than WMI.
Mike
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of
CarlosOrtiz@bayviewfinancial.com
Sent: Tuesday, April 24, 2007 3:50 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Call Mgr Server Data
Is collecting SNMP and WMI data from Call Mgr servers fully supported by
Cisco. We want to start collecting information about our servers but
want to make sure we do not introduce anything that is not TAC
supported.
Carlos
| |
| CarlosOrtiz@bayviewfinancial.com 2007-04-24, 7:11 pm |
| Does CUOM use SNMP and WMI? When I tested it a while back I remember
having to set up the SNMP strings in order to get it to work.
Carlos
"Mike Lay \(milay\)" <milay@cisco.com>
Sent by: cisco-voip-bounces@puck.nether.net
04/24/2007 04:59 PM
To
<CarlosOrtiz@bayviewfinancial.com>, <cisco-voip@puck.nether.net>
cc
Subject
Re: [cisco-voip] Call Mgr Server Data
Any application that has not been certified with cisco to work with the
CCM would be unsupported. If this tool was causing issue with CCM TAC
would ask that it be stopped.
CUOM as other 3rd party supported applications uses the WMI interface to
subscribe for events, etc... Pulling event logs from the servers can cause
high CPU on the server it is being pulled from the server:
CSCsh75491
I would recommend AXL/Soap or the SNMP mibs as a interface to pull the
performance data rather than WMI.
Mike
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of
CarlosOrtiz@bayviewfinancial.com
Sent: Tuesday, April 24, 2007 3:50 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Call Mgr Server Data
Is collecting SNMP and WMI data from Call Mgr servers fully supported by
Cisco. We want to start collecting information about our servers but want
to make sure we do not introduce anything that is not TAC supported.
Carlos__________________________________
_____________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|