|
Home > Archive > Voice over IP Cisco > April 2007 > External Phone Number Mask not recognized
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
External Phone Number Mask not recognized
|
|
| Kalle Tetto 2007-04-26, 7:11 am |
| Hi,
I would like to surpress the internal DDI on some phones, therefore I
use the External Phone Number Mask on a line and put the number to send in.
Unfortunatley this does not work with my actual CCM setup 4.2(3). I have
used it so many times before and it has always worked. But not in the
actual setup. I can also see the changed DDI in the upper row of the
Phone correct?
Any ideas, is there a special option in the general Call Manager setting
which I miss?
Cheers
| |
| Voll, Scott 2007-04-26, 1:11 pm |
| Route pattern set to use the mask?
Scott
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Kalle Tetto
Sent: Thursday, April 26, 2007 12:47 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] External Phone Number Mask not recognized
Hi,
I would like to surpress the internal DDI on some phones, therefore I
use the External Phone Number Mask on a line and put the number to send
in.
Unfortunatley this does not work with my actual CCM setup 4.2(3). I have
used it so many times before and it has always worked. But not in the
actual setup. I can also see the changed DDI in the upper row of the
Phone correct?
Any ideas, is there a special option in the general Call Manager setting
which I miss?
Cheers
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Kalle Tetto 2007-04-26, 1:11 pm |
| Thanks alot,
You are right.
Voll, Scott schrieb:
> Route pattern set to use the mask?
>
> Scott
>
> -----Original Message-----
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Kalle Tetto
> Sent: Thursday, April 26, 2007 12:47 AM
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] External Phone Number Mask not recognized
>
> Hi,
>
> I would like to surpress the internal DDI on some phones, therefore I
> use the External Phone Number Mask on a line and put the number to send
> in.
>
> Unfortunatley this does not work with my actual CCM setup 4.2(3). I have
>
> used it so many times before and it has always worked. But not in the
> actual setup. I can also see the changed DDI in the upper row of the
> Phone correct?
> Any ideas, is there a special option in the general Call Manager setting
>
> which I miss?
>
> Cheers
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|