|
Home > Archive > Voice over IP Cisco > April 2007 > AC problem with Consult transfer - Tip
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
AC problem with Consult transfer - Tip
|
|
| Fedorov, Konstantin 2007-04-26, 1:11 pm |
| Hi,
I have faced with very interesting problem.
When we do a consult transfer in the AC to the PSTN number , we have
delay about 15 sec,
before IP phone begin dialout.
Initially I think that this is problem with dialplan - but not.
Problem resolved when I checked - Enable Debug Output String under trace
configuration.
Interesting :-)
-----------------------
Sincerely Yours,
Konstantin Fedorov
| |
| Fedorov, Konstantin 2007-04-26, 1:11 pm |
| Forgot to mention
CCM ver 4.1(3)sr3a
Console versionšš 1.4(1 ES11)
-----------------------
Sincerely Yours,
Konstantin Fedorov
_____
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Fedorov, Konstantin
Sent: Thursday, April 26, 2007 7:26 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] AC problem with Consult transfer - Tip
Hi,
I have faced with very interesting problem.
When we do a consult transfer in the AC to the PSTN number , we have delay about 15 sec,
before IP phone begin dialout.
Initially I think that this is problem with dialplan - but not.
Problem resolved when I checked - Enable Debug Output String under trace configuration.
Interesting :-)
-----------------------
Sincerely Yours,
Konstantin Fedorov
|
|
|
|
|